Owner`s manual
70
Use MIDI functionality
●
Advanced modes 3 and 4
Advanced mode 3 lets you assign the Program Change Decrement function (
PC DEC
) to a
controller.
Advanced mode 4 lets you assign the Program Change Increment function (
PC INC
) to a
controller.
1.
Press the
[EDIT]
button.
2.
Slightly move the controller to which you want to assign Program Change DEC/INC. In
the case of a button, press that button.
The display will indicate the number of the selected controller.
3.
Confirm what’s indicated, and press the
[ENTER]
button.
4.
Using the
ASSIGNABLE FUNCTION
keys ( ) on the keyboard, get “PC0” to appear in
the display, then press the
[3]
or
[4]
key of the keyboard.
5.
Press the
[ENTER]
button.
* If you’ve assigned Advanced mode 3 and 4 to
[S1–S8]
,
[R1–R8]
, and
[P2]
, moving the controller to its
maximum position will transmit a program change message.
Program Change Decrement function (PC DEC)
This transmits a program change that is one less than the previously transmitted program
change number.
Program Change Increment function (PC INC)
This transmits a program change that is one greater than the previously transmitted program
change number.
The PC DEC or PC INC is transmitted on the current channel, just as in Program Change Mode
(PROGRAM CHANGE) (p. 53). The value that is actually transmitted will appear in the display.
• In the explanation here, the “previously transmitted program number” refers to the one that
was last transmitted by Advanced Mode 3 or 4 or in Program Change Mode (PROGRAM
CHANGE) (p. 53).
• Program changes transmitted by basic mode or advanced modes 1 and 2 will not affect the
increment/decrement functions.
PCR-M1_e.book 70 ページ ２００７年２月５日 月曜日 午前１１時１９分