Owner`s manual
81
Use MIDI functionality
●
Bend Pitch Control
Since the GS Bend Pitch Control message has a data range of 40H–58H (0–24 semitones), we will
select
Advanced mode 1
, which lets us specify the range. Since the data format is one byte, we
will select “DT0” (p. 77) when inserting the data.
1.
Press the
[EDIT]
button.
The display will indicate “EDT”.
2.
Slightly move the controller to which you want to assign the system exclusive message. In the
case of a button, press that button.
The display will indicate the number of the selected controller.
3.
Confirm what’s indicated and press
[ENTER]
.
4.
Using the
ASSIGNABLE FUNCTION
keys ( ) on the keyboard, get “SE0” to appear in the
display, then press the
[1]
key of the keyboard.
The display will indicate “SE1”.
5.
Confirm what’s indicated and press
[ENTER]
.
The display will blink “F0”, which is the first byte (beginning status) of a system exclusive
message. (This cannot be changed.)
6.
Confirm what’s indicated and press
[ENTER]
.
7.
Use the
[4]
and
[1]
keys to input the second byte “41”.
8.
Confirm what’s indicated and press
[ENTER]
.
Input the third, fourth and fifth bytes in the same way.
9.
Since the sixth byte is the beginning of the checksum calculation area, press the
[CHECKSUM]
key to specify this byte as the beginning of the area for which the checksum will be calculated.
10.
Confirm what’s indicated and press
[ENTER]
.
11.
Input the sixth byte.
12.
Since the seventh byte will have “2” in the upper bits and the block number in the lower bits,
press
[DATA]
three times.
The display will indicate “0BL”.
fig.checksum
13.
To specify “2” for the upper bits, press the
[2]
key.
The display will indicate “2BL”.
14.
Confirm what’s indicated and press
[ENTER]
.
15.
In the same way, enter bytes 8.
16.
Since the ninth byte is the data area, press the
[DATA]
key.
The display will indicate “DT0.”
17.
Confirm what’s indicated and press
[ENTER]
.
F0 41 10 42 12 40 2x 10 DATA SUM F7
Address Data Checksum
Block number
1 byte
Checksum calculation region
PCR-M1_e.book 81 ページ ２００７年２月５日 月曜日 午前１１時１９分