Owner`s manual

82
Use MIDI functionality
18. Since the ten byte will contain the checksum, press the [CHECKSUM] key to specify the
location at which the checksum will be input.
The display will blink “CS1” (Checksum Type 1).
19. Confirm what’s indicated and press [ENTER] .
20. Press the [F] and then [7] keys to input the ending status “F7.”
21. Confirm what’s indicated and press [ENTER] .
22. Next, specify an upper limit value of “58” for the data area.
23. Press [ENTER] .
24. Specify a lower limit value of “40” for the data area.
25. Press [ENTER] .
26. Specify the output port.
( ➝ Specifying the port (p. 59))
27. If you are making an assignment for a button, specify the button mode.
( ➝ Specifying the button mode (p. 59))
The GS Bend Pitch Control message has been assigned.
PCR-M1_e.book 82 ページ ２００７年２月５日 月曜日 午前１１時１９分