Owner`s manual

83
Use MIDI functionality
TEMPO ASSIGN
You can assign a controller to adjust the speed (20–250) of the F8 Clock message.
* In order to transmit F8 Clock messages, the F8 CLOCK setting must be “ON”.
( ➝ “F8 CLOCK ON/OFF” (p. 92))
fig.edt2
1
Press the [EDIT] button.
The display will indicate “EDT.”
2
Slightly move the controller to which you want to assign
TEMPO. In the case of a button, press that button.
The display will indicate the number of the selected controller.
fig.r-1
3
Confirm what’s indicated and press the [ENTER] button.
4
Press an ASSIGNABLE FUNCTION key ( ) on the keyboard enough times
to get “TMP” to appear in the display.
fig.tmp
5
Confirm what’s indicated and press the [ENTER] button.
6
If you are making the assignment for a button, specify the button mode.
( ➝ Specifying the button mode (p. 59))
In the case of a button, the value will be fixed at maximum (250) for ON, and minimum (20) for
OFF.
PCR-M1_e.book 83 ページ ２００７年２月５日 月曜日 午前１１時１９分