Owner`s manual

94
System settings
FACTORY RESET (Keyboard: 8)
Perform steps 1–3.
fig.rst
4. The display will indicate “RST”.
fig.yes
5. Press the [ENTER] button.
The display will blink “YES”.
6. Press the [ENTER] button.
MIDI I/F MODE (Keyboard: 9)
Perform steps 1-3.
4. Use the [VALUE] dial, the [DEC] [INC] buttons or the [0] - [1] keys to specify MIDI I/F
MODE.
5. Press the [ENTER] button.
0
MIDI I/F MODE
ON
The MIDI connectors on the rear panel of the PCR-M1 will
function as a MIDI interface. MIDI messages from a com-
puter connected via USB to the PCR-M1 will be sent to the
MIDI sound module connected to the PCR-M1’s MIDI OUT
connector. MIDI messages from a MIDI device connected to
the PCR-M1’s MIDI IN connector will be sent to the com-
puter.
1
MIDI I/F MODE
OFF
MIDI messages received by the PCR-M1 are not output
from the PCR-M1. MIDI messages will be transferred be-
tween the PCR-M1 and the computer, or between the PCR-
M1 and an external MIDI device.
PCR-M1PC
USB
EDIROL PCR
EDIROL PCR MIDI OUT
EDIROL PCR 2
EDIROL PCR 1
EDIROL PCR MIDI IN
MIDI OUT
MIDI IN
MIDI I/F MODE ON
PORT 1
PORT 2 /
MIDI OUT DEVICE
MIDI IN DEVICE
BULK RECEPTION
BULK TRANSMISSION
MIDI OUT
MIDI IN
PCR-M1PC
USB
EDIROL PCR
EDIROL PCR MIDI OUT
EDIROL PCR 2
EDIROL PCR 1
PORT 1
EDIROL PCR MIDI IN
MIDI I/F MODE OFF
PORT 2 /
BULK RECEPTION
MIDI OUT DEVICE
MIDI IN DEVICE
BULK TRANSMISSION
PCR-M1_e.book 94 ページ ２００７年２月５日 月曜日 午前１１時１９分