Owner`s manual

ManualsBrandsRoland ManualsDrumsPD-120

Before using the PD-80/PD-80R, you need to make the following settings.

• Head tension adjustment (p. 5)

• Settings for the percussion sound module (p. 2)

Hoop (Rim)

Tuning Bolt

Washer

Sensor

Stand Fixing Screw

Head

Holder

Frame

Output Jack

Contents of the Package

Names of Components

❑ PD-80 or PD-80R (pad unit)

❑ Connection Cable

❑ Tuning Key

■ Owner's Manual (this manual)

Owner's Manual

Thank you, and congratulations on your choice of the Roland PD-80/PD-80R V-Pad.

201a

Before using this unit, carefully read the sections entitled: “USING THE UNIT SAFELY” (p. 3–4) and

“IMPORTANT NOTES” (p. 4). These sections provide important information concerning the proper

operation of the unit. Additionally, in order to feel assured that you have gained a good grasp of every

feature provided by your new unit,

Owner’s manual should be read in its entirety. The manual should be

saved and kept on hand as a convenient reference.

202

written permission of ROLAND CORPORATION.

03458956 2RCC

PD-80/PD-80RW.e2 1 ページ２００４年６月１１日　金曜日　午前１０時１２分

Summary of content (8 pages)

PAGE 1
PD-80/PD-80RW.e2 1 ページ２００４年６月１１日金曜日午前１０時１２分 Owner's Manual Thank you, and congratulations on your choice of the Roland PD-80/PD-80R V-Pad. 201a Before using this unit, carefully read the sections entitled: “USING THE UNIT SAFELY” (p. 3–4) and “IMPORTANT NOTES” (p. 4). These sections provide important information concerning the proper operation of the unit.
PAGE 2
PD-80/PD-80RW.e2 2 ページ２００４年６月１１日金曜日午前１０時１２分 Recommended Settings for the Percussion Sound Module Recommended settings for the trigger parameters when using the PD-80/PD-80R with various percussion sound modules. • • • • When used with a percussion sound module capable of positional sensing, you can obtain tonal changes by varying the location at which the pad is struck. You can perform rim shots and cross-sticking with the PD-80R.
PAGE 3
PD-80/PD-80RW.e2 3 ページ２００４年６月１１日金曜日午前１０時１２分 USING THE UNIT SAFELY The symbol alerts the user to important instructions or warnings.The specific meaning of the symbol is determined by the design contained within the triangle. In the case of the symbol at left, it is used for general cautions, warnings, or alerts to danger. Used for instructions intended to alert the user to the risk of death or severe injury should the unit be used improperly.
PAGE 4
PD-80/PD-80RW.e2 4 ページ２００４年６月１１日 104 • 金曜日午前１０時１２分 Try to prevent cords and cables from becoming entangled. Also, all cords and cables should be placed so they are out of the reach of children. • ................................................................................................ 106 • Never climb on top of, nor place heavy objects on the unit. ................................................................................................ ...........................................
PAGE 5
PD-80/PD-80RW.e2 5 ページ２００４年６月１１日金曜日午前１０時１２分 Features • On the PD-80/80R, adjusting the head tension affects only the head response, and does not change the pitch of the sound, as it would on an acoustic drum. • The head tension will change as the instrument is used, so you should readjust when necessary.
PAGE 6
PD-80/PD-80RW.e2 6 ページ２００４年６月１１日金曜日午前１０時１２分 Connecting to the Percussion Sound Module Adjustment for Positional Sensing with the TD-8 or the TD-10 When the TD-8 or the TD-10 is used as the sound module, the location at which the pad is struck can be varied to produce tonal changes. In this case, it is important to adjust the head so the tension is evenly distributed, so the striking location can be detected accurately. For details on adjustments, refer to the TD8 or the TD-10 owner’s manual.
PAGE 7
PD-80/PD-80RW.e2 7 ページ２００４年６月１１日金曜日午前１０時１２分 Replacing the Head About the PD-80R's Lock Bushings The PD-80R is provided with lock bushings to prevent rotation and loosening of the tuning bolts caused by vibration transmitted from the hoop, as the result of using rim shots or other performance techniques.
PAGE 8
PD-80/PD-80RW.