User`s manual

Part 2

1. Cutting Area

The maximum cutting area of the PNC-3100 is 250 mm × 150 mm × 150 mm (9-13/16" × 5-7/8" × 5-7/8"). Converting

this into coordinate values based on the machine's step number (1 step = 1/100 mm (0.00039")), we obtain the

coordinate system; (x, y, z)=(25000, 15000, 15000).

The actual available cutting area is subject to restrictions according to the length of the attached tool, the X table position

at which the workpiece is fixed, and the vice height (in the case that the vice is used); and in some cases it may be larger

than the maximum operating area.

User's Reference

150 mm (5-7/8")

250 mm

(9-13/16")

Part