User`s manual

Appendix

PNC-3100

XY table size 560 mm x 170 mm (22-1/16" x 6-11/16")

Max. cutting area 250 mm(X) x 150 mm(Y) x 150 mm(Z) (9-13/16"(X) x 5-7/8"(Y) x 5-7/8"(Z))

Software resolution 0.01 mm/step (0.00039")

Mechanical resolution 0.00125 mm/step (micro-step control)

Feed rate X, Y-axis : Max. 60 mm/sec. (2-3/8"/sec.) Z-axis : Max. 30 mm/sec. (1-3/16"/sec.)

Spindle motor 180W (AC commutator motor)

Revolution speed 3000—8000 rpm (variable manually or via instruction)

Display function X, Y and Z all-axis display function (0.01 mm unit), Spindle RPM (100 rpm unit)

Interface Parallel (in compliance with the specification of Centronics)

Serial (under RS-232C standard)

Buffer size 1Mbyte

Instruction system CAMM-GLI (mode1, mode2)

Control keys Z0, Z1, Z2, HOME, ENTER, PAUSE ON, OFF, SPINDLE TEST ON/OFF

SENSOR ON/OFF, REPLOT, BUFFER CLEAR, VIEW

, , , , , , JOG HANDLE, JOG, SPINDLE CONTROL

Source 2.4 A / 117 V 1.4 A / 220—230 V 1.3 A / 240 V

External dimensions Main unit : 560 mm(W) x 605 mm(H) x 540 m(D)

(22-1/16"(W) x 23-7/8"(H) x 21-5/16"(D))

Controller : 124 mm(W) x 221 mm(H) x 392 mm(D)

(4-15/16"(W) x 8-3/4"(H) x 15-7/16"(D))

Switch panel : 226 mm(W) x 48 mm(H) x 122 mm(D)

(8-15/16"(W) x 1-15/16"(H) x 4-13/16"(D))

Weight Main unit : 52 kg (114.6 lb.) Controller : 9 kg (19.8 lb.) Switch panel : 1.1 kg (2.4 lb.)

Operation temperature 5—40°C (41—104°F)

Operation humidity 35 %—80 % (no condensation)

Accessories ø6 collet chuck, collet cap (these are installed on the unit), power cord

spanners : 3, hexagonal wrenches : 2, T nuts : 2, user's manual

• Interface Specification

[ Parallel ]

Standard In compliance with the specification of Centronics

Input signal STROBE(1BIT), DATA(8BIT)

Output signal BUSY(1BIT), ACK(1BIT)

I/O signal lebel TTL level

Transmissinon method Asynchronous

[ Serial ]

Standard RS-232C specification

Transmissinon method Asynchronous, duplex data transmission

Transmissinon speed 4800, 9600 (adjustable by DIP switch)

Parity check Odd, Even, None (adjustable by DIP switch)

Data bits 7 or 8 bits (adjustable by DIP switch)

Stop bits 1 or 2 bits (adjustable by DIP switch)

Specifications