Owner`s manual

25
1. Connect the PS-5 to another instru-
ment (page 11).
2. Rotate the PITCH switch to select the
desired degree of shift.
3. Rotate the SPEED knob to adjust the period
used to reach the shift and the delay.
4. Repeat Steps 2 and 3 until the sound is
adjusted to your liking.
5. Use the BALANCE knob to adjust the
volume of the output sound.
* The same sound is output
from both OUTPUT A
(MONO) and OUTPUT B.
* Sounds input at 0 dB are
output at the same volume.
6. With a Roland EV-5
(sold separately) con-
nected to the EXP jack, you can use the
pedal for smooth, continuous adjustment
of the degree of shift, within the range set
with the PITCH switch in Step 2.
* The degree of shift adjusted with the EV-5
is determined by the point at which the PS-
5’s pedal switch is turned on.
1
2
3
4
5
12 (1 OCT)
-1
-2
-3
-4
-5
-12 (1 OCT)
+6 dB
0 dB
-
∞
Pitch Shift
(ON)
With Effect
(OFF)
Without Effect