Operation Manual

30
Setting from the Control Panel
Setting the Compressor
Screen Indication Setting Description
Gate Mutes signals below a specied level (in dB).
Bypass
When set to o, the compressor is enabled. When set to on, the
compressor is disabled.
Threshold
Species the signal level (in dB) at which the compressor begins
operating.
Ratio
Species the compression ratio by which the audio signal is to be
compressed.
Attack
Time
Species the time (in msec) from when the input level exceeds the
threshold level until the compressor begins to operate.
Release
Time
Species the time (in msec) from when the input level falls below the
threshold level until the compressor stops operating.
Gain Adjusts the output level (in dB) of the compressor.
Stereo
Link
When you set this function to on, the compressor setting of the
INPUT 2R jack will follow that of the INPUT 1L jack.