Operation Manual

32
Setting from the Control Panel
Selecting the Sound Output from the COAXIAL OUT
(3/4) Jack
You can select the sound (from either the computer (WAVE OUT 1-2, WAVE OUT 3-4) or from the
direct mixer) to be output from the COAXIAL OUT (3/4) jack.
DIGITAL OUT SELECTOR
COAXIAL OUT (3/4)
DIRECT MIX (from the direct mixer)
WAVE OUT 1-2 (from the computer)
WAVE OUT 3-4 (from the computer)
1. From the “Device” menu, select [Device Settings].
The dialog appears.
2. From the “Digital Out” drop-down list, select the sound to be output.
* No sound is output from the COAXIAL OUT (3/4) jack when operating at a sampling rate of 192
kHz.
Saving and Loading Your Settings
From the QUAD-CAPTURE control panel, you can save the current settings as a le, or load previously
saved settings from a le.
The following settings are saved.
• Preamp settings (p. 29)
• Compressor settings (p. 30)
• Direct mixer settings (p. 31)
• DIGITAL OUT SELECTOR settings (p. 32)
Saving Settings
1. From the “Device” menu, select [Save settings].
2. Specify the le in which the settings are to be saved.
Loading Settings
1. From the “Device” menu, select [Load settings].
2. Specify the le that contains the settings you want to load.