Owner`s manual

12
Panel Descriptions
Rear Panel
11
12
14 15 16 1714
12
13
11. USB connector
Connects the QUAD-CAPTURE to a computer that is compatible with USB 2.0.
Before connecting, you must install the driver (p. 14).
12. MIDI OUT/IN connectors
Connect the MIDI OUT connector to your MIDI sound module, etc. Connect the MIDI IN connector to
your MIDI keyboard or MIDI controller.
13. COAXIAL IN (3/4)/OUT (3/4) jacks
The COAXIAL IN (3/4) jack inputs the digital audio signal. The COAXIAL OUT (3/4) jack outputs the
digital audio signals.
* While the QUAD-CAPTURE is synchronized with external digital equipment, a small pop noise
may be heard, but this does not indicate a malfunction.
14. OUTPUT 1L/2R jacks (balanced TRS type)
Outputs the analog audio signal.
* When using balanced TRS jacks with the OUTPUT 1L/2R
jacks, they should be wired as shown in the illustration.
Make connections only after rst checking the pin outs of
the other equipment you intend to connect.
GND (SLEEVE)
HOT (TIP)
COLD (RING)