Owner`s manual
Introduction to the Studio Foundation Sound Recording Kits v.5 (Sp13)
Power on the recorder
1
R-09
R-09HR
1
2
R-09
R-09HR
R-05
1
R-05
1. To power on, press the POWER button (R-09
or R-09HR) and hold for a second or so; or
slide the POWER slider (R-05) and hold for a
second or so.
2. Check the battery level: all white (all black
on the R-05 display) = 100% full*
3. If using external microphone, make sure
Plug-In power is ON (can be turned on via
INPUT SETUP Menu on R-09/R-05 or the
switch on the back of R-09HR)
2
* For an accurate reading you must set the match battery type. Recorders are sent
out with rechargeable Nickel Metal Hydride (Ni-HM) batteries (see slides 18-19 for
more on recorder conguration)
5
Introduction to the Studio Foundation Sound Recording Kits v.5 (Sp13)
1. On the R-09: press the FINDER MENU button and hold it
down for a moment until the SELECT menu appears or on
the R-09HR or R-05: press the MENU button.
2. Navigate using the ▼ and ▲ buttons to select
9 SD CARD and press ●REC
3. Navigate using the ▼ and ▲ buttons to select FORMAT
and press ●REC,
4. Press the ▶▶ button to select Yes, then press ●REC (it
will say, “Now Processing”) when done, Press MENU to
return to the menu
5. Navigate using the ▼ and ▲ buttons to select
RECORDER SETUP and press ●REC
6. Press the ▶▶ or ◀◀ buttons to select the Sample Rate
(choose 48kHz)
7. Navigate using the ▼ to select Record Mode, then press
the ▶▶ or ◀◀ buttons to select Record Mode (choose
WAV-16bit).
8. You can navigate back to the Sample Rate using the ▲
button, and then press FINDER MENU on the R-09 or
MENU on the R-09HR or R-05 to return to the Menu.
Format card & set recording settings
1
4
7
8
1
R-09 R-09HR
See pp. 26-28 of the R-09 Owners Manual or pp. 34-36 of the R-09HR Owners
Manual or pp. 31-42 of the R-05 Owners Manual for more information.
Every time you check out a recorder from the cage, the rst thing you should do is:
1
R-05
6