Owner`s manual

Introduction to the Studio Foundation Sound Recording Kits v.5 (Sp13)
1. Press the ●REC button, the red ● ashes, indicating
Record-Standby mode
2. If you are not using AGC (Automatic Gain Control)*,
press the + or – INPUT level buttons to adjust the
level of the recording so the meter in the display
has peaks averaging between -12 and -6 (0 being
the maximum level). More later on setting levels.
3. Adjust the headphone volume level to a
comfortable monitoring level, this does not aect
the level of the actual recording.
4. Press the ●REC button to start Recording
5. Press  when you’re nished recording
Your rst recording
1
3
R-09
R-09HR
R-05
1
2
2
3
3
R-09 and R-09HR
R-05
audio level indicators
7
Introduction to the Studio Foundation Sound Recording Kits v.5 (Sp13)
1. Connect headphones to the headphone jack
2. Press ▶ to begin playback
3. Press the + or – VOLUME buttons on the side
panel to adjust the playback levels
4. To move forward or backwards in the
recording, press and hold the ▶ ▶ or ◀◀
buttons
5. When nished, press 
Listen to your recording
1
3
2
3
1
R-09
R-09HR
R-05
1
3
2
4
4
4
4
5
5
8