Owner`s manual

Recording
38
5. Choose the upper boundary of the
frequency range to be cut.
Setting
100 Hz
200 Hz
400 Hz
6. Touch <BACK> twice to return to the
menu screen (p. 18).
TIPS
The limiter and low-cut lter can be
turned on/o while in the recording-
standby mode or during recording.
1. During recording or in the recording-
standby mode, choose the INFO tab
and press <LCF/LMT>.
2. Touch the <LOW CUT> or <LIMITER>
icon to turn it on/o.
ANALOG IN Settings
Here you can make settings for the ANALOG
IN 1/L jack and ANALOG IN 2/R jack input
type, phantom power supply, and MS mic.
Set the limiter and low-cut lter settings in
the same way as for the internal mic (p. 36).
Setting the input type
The two inputs can be used as monaural x
2 or as stereo x 1. In addition, you can also
use an MS type stereo mic.
1. Choose [MENU]Ú<INPUT
SETUP>Ú<ANALOG IN>.
2. Touch <INPUT TYPE>.