Owner`s manual

Recording
39
Overview Getting Ready Recording Playback File Operation Computer Appendix
3. Select the type.
Setting Description
SEPARATE
Settings can be made separately
for the ANALOG IN 1/L jack and
ANALOG IN 2/R jack.
LINK
Settings for the ANALOG IN 1/L
jack and ANALOG IN 2/R jack will
be linked as a stereo pair.
MS-MIC
The ANALOG IN 1/L jack and
ANALOG IN 2/R jack will provide
for MS type stereo input.
* If MS is selected, you must use a MS mic
that directly outputs the mid signal and
the side signal. Connect the mid signal
to the ANALOG IN 1/L jack, and the side
signal to the ANALOG IN 2/R jack.
* When SEPARATE is selected, you can
make settings for phantom power,
limiter, and low-cut lter separately for
both the ANALOG IN 1/L jack and the
ANALOG IN 2/R jack.
4. Touch <BACK> twice to return to the
menu screen (p. 18).
Supplying phantom power
Here’s how to supply phantom power to the
mics connected to the ANALOG IN 1/L jack
and ANALOG IN 2/R jack.
1. Choose [MENU]Ú<INPUT
SETUP>Ú<ANALOG IN>.
2. Touch <INPUT1 PHANTOM> or
<INPUT2 PHANTOM>.
* If you’ve set LINK or MS mic as the input
type, all you need to do for phantom
power to be supplied is to make the
setting [INPUT1 PHANTOM].
3. Touch <ON>.