Owner`s manual

Recording
40
* Always turn the phantom power o
when connecting any device other than
condenser microphones that require
phantom power to the XLR connector.
You risk causing damage if you
mistakenly supply phantom power to
dynamic microphones, audio playback
devices, or other devices that don’t
require such power. Be sure to check the
specications of any microphone you
intend to use by referring to the manual
that came with it.
(This instrument’s phantom power: 48 V
DC, 10 mA Max)
4. Touch <BACK> twice to return to the
menu screen (p. 18).
MS mic settings
Here’s how to adjust the MS mic’s stereo
width.
1. Choose [MENU]Ú<INPUT
SETUP>Ú<ANALOG IN>.
2. Touch <MS-MIC WIDTH>.
“MS-MIC WIDTH” is located on page 2/2.
Touch
to access 2/2.
* The <MS-MIC WIDTH> setting is shown
only if the input type is set to MS mic.
3. Use to adjust the stereo width.
When you’ve specied the value,
touch <OK>.
Setting 1–5–10
4. Touch <BACK> twice to return to the
main screen (p. 16).