Owner`s manual

Recording

Overview Getting Ready Recording Playback File Operation Computer Appendix

Setting the input level

1. From the main screen, press the panel’s [SENS] button.

The INPUT SENS SETUP screen will appear.

2. Produce sound on the source you’re recording.

The level meter will move according to the loudness of the sound being input to the R-26.

3. Turn the [INPUT 1] knob, [INPUT 2] knob, and the touch panel to adjust the input

level.

Adjust the level until it is as high as you can get it without causing the PEAK indicator, or PEAK in

the level meter, to light.

The recording sources adjusted by each knob and the touch panel (p. 47) will depend on the

combination of REC MODE and REC SOURCE you’ve selected.

REC MODE REC SOURCE [INPUT 1] knob [INPUT 2] knob Touch Pael

1 CHANNEL ANALOG (MONO) ANALOG IN 1/L – –

2 CHANNEL

INTERNAL INTERNAL MIC – –

ANALOG ANALOG IN 1/L, 2/R – –

ANALOG (MONO) ANALOG IN 1/L ANALOG IN 2/R –

PLUG-IN PLUG IN MIC – –

4 CHANNEL

XY + OMNI

INTERNAL MIC

(shared by XY and

OMNI)

– –

INTERNAL + ANALOG INTERNAL MIC ANALOG IN 1/L, 2/R –

ANALOG + PLUG-IN ANALOG IN 1/L, 2/R PLUG IN MIC –

XY + PLUG-IN INTERNAL MIC (XY) PLUG IN MIC –

XY+OMNI (S) INTERNAL MIC (XY)

INTERNAL MIC

(OMNI)

–

ANALOG(S)

+INTERNAL

ANALOG IN 1/L ANALOG IN 2/R

INTERNAL MIC

(shared by XY and

OMNI)

ANALOG(S)

+PLUG-IN

ANALOG IN 1/L ANALOG IN 2/R PLUG IN MIC