User's Manual

23
Making Detailed Settings for Tones
The RD-88 has two types of sound-related editing.
Scene edit
Here you can edit parameters for a Scene. These parameters include
the on/o setting and level adjustment of each zone, eect settings
for each Scene.
System eect edit
Here you can edit settings for the eects that apply to the overall
output sound (system eects).
The system eects provide chorus/delay, reverb, EQ, and compressor.
NOTE
5 The edited settings will disappear unless you save (write) them. If
you want to keep the settings, save them as follows.
5 A Scene that you’re editing is indicated by an edit symbol (*) beside
the Scene number.
Editing a Scene
1. Press the [MENU] button.
2. Use the cursor [ ] [ ] buttons to select “SCENE EDIT,”
and press the [ENTER] button.
3. Use the cursor [ ] [ ] buttons to select the item that
you want to edit, and press the [ENTER] button.
4. Use the cursor [ ] [ ] buttons to select a parameter,
and use the [DEC] [INC] buttons to edit the value.
For details, refer to “Parameter Guide” (PDF).
MEMO
If there are multiple pages within an item, “
” “ ” symbols are shown
at the upper right of the screen. Use the cursor [<] [>] buttons to
move between pages.
Saving a Scene (Write)
5. To save the changes, press the [WRITE] button.
MEMO
If you edit the Scene, an “*” symbol appears beside “SCENE.”
6. Use the cursor [ ] [ ] buttons to select “SCENE,” and
then press the [ENTER] button.
A screen appears where you can select the save-destination
Scene.
7. Use the cursor [ ] [ ] buttons to select the save-
destination Scene, and then press the [ENTER]
button.
The Scene name entry screen appears.
8. Use the cursor [<] [>] buttons to move the cursor,
and use the [DEC] [INC] buttons to change the
character.
9. When you’ve nished editing the name, press the
[ENTER] button.
The SCENE WRITE conrmation screen appears.
NOTE
When you save, the Scene of the selected save-destination is
overwritten, and the previous data is lost.
10. To execute, use the cursor [>] buttons to select
“WRITE,” and then press the [ENTER] button.
If you decide to cancel, press the [EXIT] button.
NOTE
The changes in the Scene you’re editing are lost if you turn the power
o or select another Scene. If you want to keep the settings, save the
Scene.
Editing the System Eects
1. Press the [MENU] button.
2. Use the cursor [ ] [ ] buttons to select “SYSTEM
EFFECT,” and then press the [ENTER] button.
3. Use the cursor [<] [>] buttons to select the eect
that you want to edit, use the cursor [ ] [ ] buttons
to select a parameter, and use the [DEC] [INC]
buttons to edit the value.
For details, refer to “Parameter Guide” (PDF).
Saving the System Eects (Write)
4. If you want to save the changes, press the [WRITE]
button.
MEMO
If you edit the system settings, an “*” symbol appears beside
“SYSTEM.”
5. Use the cursor [ ] [ ] buttons to select “SYSTEM”
and then press the [ENTER] button.
The SYSTEM WRITE conrmation screen appears.
6. To execute, use the cursor [>] buttons to select
“WRITE,” and then press the [ENTER] button.
If you decide to cancel, press the [EXIT] button.