User's Manual
Table Of Contents
- Introduction
- Panel Descriptions
- Overview of the RD-88
- Performance
- Listening to the Demo (DEMO PLAY)
- Piano Performances
- Performing with a Variety of Scenes
- Playing Multiple Tones with the Keyboard
- Adjusting the Volume Level for Individual Zones
- Changing the Key Touch
- Transposing the Key of the Keyboard (TRANSPOSE)
- Adding Reverberation to the Sound (REVERB)
- Adding Breadth to the Sound (CHORUS/DELAY)
- Modifying the Sound in Real Time (WHEEL1/2)
- Adding Liveliness to the Sound (COMPRESSOR)
- Adjusting the Character of the Sound (TONE COLOR)
- Applying Various Effects to the Sound (MFX)
- Adjusting the Levels of Each Frequency Range (EQUALIZER)
- Disabling the Buttons (Panel Lock)
- Using the Convenient Functions in Performances
- Making Detailed Settings for Tones
- Other Functions
- USING THE UNIT SAFELY
- IMPORTANT NOTES
- Main Specifications
![](/manual/roland/rd-88/user-s-manual-english/images/img-24.png)
24
Other Functions
Convenient Functions (UTILITY)
Here you can back up the RD-88’s data to a USB ash drive, or restore
data from a USB ash drive back into the RD-88. You can also use the
“UTILITY” functions to return the RD-88 to its factory-set condition, or
format a USB ash drive.
UTILITY Explanation
BACKUP Backs-up user data to a USB ash drive.
RESTORE
Restores backup data from a USB ash drive into the
RD-88.
IMPORT TONE
Import tones saved on a USB ash drive into the
RD-88.
FACTORY RESET
Resets the RD-88’s settings to their factory-set
condition.
FORMAT USB MEMORY Initializes a USB ash drive.
Backing Up Data to USB Flash Drive (BACKUP)
Here’s how to back up user data to a USB ash drive.
Data that is backed up
5 All Scene data
5 Favorites
5 System settings (including system eects)
NOTE
Never turn o the power or remove the USB ash drives while the
screen indicates “Executing....”
1. Press the [MENU] button.
2. Use the cursor [ ] [ ] buttons to select “UTILITY,”
and then press the [ENTER] button.
3. Use the cursor [ ] [ ] buttons to select “BACKUP,”
and then press the [ENTER] button.
The BACKUP NAME screen appears.
4. Use the cursor [<] [>] buttons to move the
cursor, and use the [DEC] [INC] buttons to select
characters.
5. When you’ve specied the le name, press the
[ENTER] button.
A conrmation message appears.
If you decide to cancel, press the [EXIT] button.
6. To execute, press the [ENTER] button.
When the backup is nished, the screen indicates “Completed!”
If a le of the same name exists, a conrmation screen
(Overwrite?) asks whether you want to overwrite the existing le.
Restoring Backup Data (RESTORE)
Here’s how user data that you backed-up on a USB ash drive can be
returned to the RD-88. This operation is called “restore.”
NOTE
5 All user data are rewritten when you execute the restore operation.
If your RD-88 contains important data, assign it a dierent name
and back it up to an USB ash drive before you restore.
5 Never turn o the power or remove the USB ash drives while the
screen indicates “Executing....”
1. Press the [MENU] button.
2. Use the cursor [ ] [ ] buttons to select “UTILITY,”
and then press the [ENTER] button.
3. Use the cursor [ ] [ ] buttons to select “RESTORE,”
and then press the [ENTER] button.
4. Use the cursor [ ] [ ] buttons to select the le that
you want to restore.
5. Press the [ENTER] button.
A conrmation message appears.
If you decide to cancel, press the [EXIT] button.
6. To execute, press the [ENTER] button.
When the restore operation is nished, the screen indicates
“Completed. Turn o power.”
7. Turn the power of the RD-88 o and then on again.
Adding the Sounds (IMPORT TONE)
Tones that you download or tones that you exported from
another unit can be imported into the RD-88 as added tones.
* Here explain how to import user tones. If you want to import/
install a sound pack or wave expansion, refer to "Sound Pack/Wave
Expansion Install Manual" (PDF).
Saving Tones to a USB Flash Drive
* If you’re using the USB ash drive for the rst time, format it using
the RD-88.
&“Formatting a USB Flash Drive (FORMAT USB MEMORY)”
(p. 27)
1. By downloading or by using the export function
of another unit, obtain an SVZ le containing the
tones that you want to import, and place the le on
your computer.
2. Connect the USB ash drive to your computer.
3. Save the SVZ le in the ROLAND/SOUND folder of
the USB ash drive.
4. Disconnect the USB ash drive from your computer,
and connect it to the RD-88.