VS-100_r_e.
VS-100_r_e.
VS-100_r_e.book 3 ページ 2009年3月25日 水曜日 午前9時34分 USING THE UNIT SAFELY About WARNING and CAUTION Notices About the Symbols The symbol alerts the user to important instructions or warnings.The specific meaning of the symbol is determined by the design contained within the triangle. In the case of the symbol at left, it is used for general cautions, warnings, or alerts to danger. Used for instructions intended to alert the user to the risk of death or severe injury should the unit be used improperly.
VS-100_r_e.book 4 ページ 2009年3月25日 水曜日 午前9時34分 USING THE UNIT SAFELY • Be sure to use only the AC adaptor supplied with the unit. Also, make sure the line voltage at the installation matches the input voltage specified on the AC adaptor's body. Other AC adaptors may use a different polarity, or be designed for a different voltage, so their use could result in damage, malfunction, or electric shock. • .......................................................................................................
VS-100_r_e.book 5 ページ 2009年3月25日 水曜日 午前9時34分 USING THE UNIT SAFELY • The unit and the AC adaptor should be located so their location or position does not interfere with their proper ventilation. • Whenever you suspect the possibility of lightning in your area, disconnect the AC adaptor from the outlet. ...................................................................................................................... ................................................................................
VS-100_r_e.book 6 ページ 2009年3月25日 水曜日 午前9時34分 IMPORTANT NOTES Power Supply • Do not connect this unit to same electrical outlet that is being used by an electrical appliance that is controlled by an inverter (such as a refrigerator, washing machine, microwave oven, or air conditioner), or that contains a motor. Depending on the way in which the electrical appliance is used, power supply noise may cause this unit to malfunction or may produce audible noise.
VS-100_r_e.book 7 ページ 2009年3月25日 水曜日 午前9時34分 IMPORTANT NOTES Using SD Memory Cards Copyright • • Recording, duplication, distribution, sale, lease, performance, or broadcast of copyrighted material (musical works, visual works, broadcasts, live performances, etc.) belonging to a third party in part or in whole without the permission of the copyright owner is forbidden by law.
VS-100_r_e.book 8 ページ 2009年3月25日 水曜日 午前9時34分 Contents USING THE UNIT SAFELY............................................................................................................3 IMPORTANT NOTES .....................................................................................................................6 Overview..................................................................................... 11 Overview of the SONAR V-STUDIO 100.........................................................
VS-100_r_e.book 9 ページ 2009年3月25日 水曜日 午前9時34分 Connections............................................................................... 37 Connections ................................................................................................................................ 38 Connecting the AC adaptor........................................................................................................38 Connecting computers and audio equipments.....................................................
VS-100_r_e.book 10 ページ 2009年3月25日 水曜日 午前9時34分 Before using this unit, carefully read the sections entitled: “USING THE UNIT SAFELY” and “IMPORTANT NOTES” (Hardware manual p. 3; p. 6). These sections provide important information concerning the proper operation of the unit. Additionally, in order to feel assured that you have gained a good grasp of every feature provided by your new unit, Hardware manual and Getting started should be read in its entirety.
VS-100_r_e.
VS-100_r_e.book 12 ページ 2009年3月25日 水曜日 午前9時34分 Overview of the SONAR V-STUDIO 100 fig.fader.eps High-end spec audio interface functions • USB 2.
VS-100_r_e.book 13 ページ 2009年3月25日 水曜日 午前9時34分 Overview of the SONAR V-STUDIO 100 fig.fader.eps A digital mixer that supports a range of inputs • A digital mixer with 8 channel input • High quality sound design through digital signal processing with internal 40-bit computing • A compressor and a 3-band parametric equalizer for analog input WAVE recorder function • Directly record sample or performance onto an SD card Connecting to a computer is not necessary.
VS-100_r_e.book 14 ページ 2009年3月25日 水曜日 午前9時34分 Panel Descriptions Input/output component Front panel fig.front01.eps 1. INPUT 1L/INPUT 2R Analog audio signal input jacks with a microphone preamp. You can use the [SENS] knob to adjust the input level of INPUT 1L/INPUT 2R. The level is displayed on the screen. (See p. 18.) These inputs correspond to input 1-2 in the USB audio interface function. MIC (XLR balanced input) This switch changes the input impedance.
VS-100_r_e.book 15 ページ 2009年3月25日 水曜日 午前9時34分 Panel Descriptions Rear panel fig.rear01.eps 4. Cord hook Hook the AC adapter’s cord here, see p. 38. 5. Power switch Turn the power on/off. For more information, see p. 40. 6. DC IN jack Connect the DC plug of the supplied AC adaptor here. 7. USB connector Use a USB cable to connect the V-STUDIO 100 to a personal computer. 8.
VS-100_r_e.book 16 ページ 2009年3月25日 水曜日 午前9時34分 Panel Descriptions INPUT OUTPUT fig.rear02.eps fig.rear03.eps 15. MAIN OUTPUT 1 and 2 (1/4” TRS balanced output) 11. INPUT 3L/MONO and 4R (1/4” TRS balanced input) Analog audio signal input jacks for line input. If you only plug into one INPUT 3L/MONO jack, it will function as a mono input. These inputs correspond to input 3-4 in the USB audio interface function.
VS-100_r_e.book 17 ページ 2009年3月25日 水曜日 午前9時34分 Panel Descriptions Digital mixer component fig.mixer01.eps Input section fig.01.eps 1. [PAN] knob (INPUT 1L/INPUT 2R) Use this knob to adjust the balance between the right and left channels of the signal that is input from the INPUT 1L/2R. 2. [COMP/EQ] button Use this button to turn the compressors and equalizers on and off for each channel. For more information, see “Using the compressors and equalizers” (p. 48). 3.
VS-100_r_e.book 18 ページ 2009年3月25日 水曜日 午前9時34分 Panel Descriptions System section fig.02.eps 5. Compressor/equalizer setting button Use this button to switch the display on the setting screen between the compressor and the equalizer when using these effects. For more information about using the compressors and equalizers, see “Using the compressors and equalizers” (p. 48). 8. Display screen This screen displays a range of information.
VS-100_r_e.book 19 ページ 2009年3月25日 水曜日 午前9時34分 Using the control surface component fig.mixer03.eps The button is off Computer If you connect SONAR V-STUDIO 100 to a computer and turn the power on, the section within the bounding rectangle in this illustration functions as the control surface for SONAR VS. Control surface screen fig.ctrl-disp1.
VS-100_r_e.book 20 ページ 2009年3月25日 水曜日 午前9時34分 Channel strip section fig.daw01.eps This section controls SONAR’s track or bus parameters. 1. Track selection button Use this button to select the track (or bus) to control. [SHIFT] + track selection buttons Press this key combination to switch the current strip between the track and the bus. Track selection button + [VALUE] knob Press and hold the track selection button while you turn the [VALUE] knob to select the track to control. 2.
VS-100_r_e.book 21 ページ 2009年3月25日 水曜日 午前9時34分 4. Channel fader Use this to control the volume of the current strip. The channel fader has a touch-sensitive motor fader so it can move in response to the volume of the current strip. It also moves while playing, according to the automation information. To record automation information, touch and then release the fader during automation recording. The motor fader moves very quietly.
VS-100_r_e.book 22 ページ 2009年3月25日 水曜日 午前9時34分 Transport section 5. fig.daw02.eps Button Press this button to rewind the current time. [SHIFT] + button Use this key combination to move the current time to the previous measure. 6. Button Press this button to fast-forward the current time. button [SHIFT] + Use this key combination to move the current time to the next measure. This section controls playback of SONAR. 1. [LOOP] button Press this button to turn SONAR’s loop function on or off.
VS-100_r_e.book 23 ページ 2009年3月25日 水曜日 午前9時34分 ACT section fig.daw03.eps When you press the [ACT] button to turn on the ACT function, the button lights up and you can use the [R1]–[R4] knobs to control the parameters of plug-ins that support the function. You cannot control plug-ins that do not support the ACT function. You can configure the parameters controlled by the four knobs in the VS-100 properties page.
VS-100_r_e.book 24 ページ 2009年3月25日 水曜日 午前9時34分 VS-100 properties page fig.proppage.eps The VS-100 properties page displays the names of the parameters that can be controlled with the [R1]–[R4] knobs. You can also configure the action of the footswitches or of the motor fader connected to SONAR V-STUDIO 100. To display the VS-100 properties page, in SONAR, select “VS-100” command from “Tools” menu.
VS-100_r_e.
VS-100_r_e.book 26 ページ 2009年3月25日 水曜日 午前9時34分 Using the WAVE recorder fig.mixer04.eps Button is lit When you turn on the power of the SONAR V-STUDIO 100 without connecting it to a computer, the [DAW/WAVE RECORDER] button lights up and you can operate the WAVE recorder. You can use the WAVE recorder to record signals that have been mixed in the digital mixer section.
VS-100_r_e.book 27 ページ 2009年3月25日 水曜日 午前9時34分 Using the WAVE recorder Information displayed on the main screen fig.recorder02.eps 1. File name 2. Level meter • Displays the output level • When input signal was detected, displays the input level 3. Marker view • Number on the left: the number of the marker that was passed at the point displayed on the time counter • Number on the right: the number of markers contained in the file 4.
VS-100_r_e.book 28 ページ 2009年3月25日 水曜日 午前9時34分 Using the WAVE recorder SD memory card In SONAR V-STUDIO 100, data is recorded on an SD memory card. Inserting an SD memory card fig.sd-ins.eps NEVER insert or remove an SD memory card when the power of SONAR V-STUDIO 100 is on. Doing so may result in the loss of data from the SONAR V-STUDIO 100 or the SD memory card. 1. Turn the power off. 2. Insert the SD card into the SD card slot.
VS-100_r_e.book 29 ページ 2009年3月25日 水曜日 午前9時34分 Using the WAVE recorder Recording 1. Check the input level. fig.recorder04.eps If the peak indicator at the right end of the level meter (indicated by the arrow in the illustration) is lit, turn the [MAIN MIX] knob to the left to reduce the level. 2. Press the (Record) button and start recording. The time counter starts counting forward. 3. Press the (Stop) button to stop recording. The recorded file will automatically be given a name of “REC_****.
VS-100_r_e.book 30 ページ 2009年3月25日 水曜日 午前9時34分 Using the WAVE recorder Playing back a file 1. Press the (Playback) button. 2. Use the [PLAYBACK] knob to adjust the playback volume. If the sampling frequency of the file being played differs from the sampling frequency setting of the SONAR V-STUDIO 100, you may hear a small amount of noise when the file is playing or stopped. In this case, refer to “Sampling frequency setting” (p.
VS-100_r_e.book 31 ページ 2009年3月25日 水曜日 午前9時34分 Using the WAVE recorder Viewing file information The finder screen lets you view the file size and file format. 1. From the main screen, press the [CURSOR/VALUE] knob to open the finder screen (p. 26). 2. In the finder screen, turn the [CURSOR/VALUE] knob to select the desired file, and then press the [CURSOR/VALUE] knob. 3. Turn the [CURSOR/VALUE] knob to highlight “Information,” and then press the [CURSOR/VALUE] knob. fig.finder-screen3.eps 4.
VS-100_r_e.book 32 ページ 2009年3月25日 水曜日 午前9時34分 Using the WAVE recorder Inserting markers During playback or recording, you can insert markers at any point on the file. By inserting markers on a file, you can quickly jump to those positions by pressing the button. button or 1. Play back the file. 2. When the file reaches the point where you want to insert a mark, press the [MARKER] button. The number displayed in the marker counter increases. fig.marker01.
VS-100_r_e.book 33 ページ 2009年3月25日 水曜日 午前9時34分 Using the WAVE recorder Loop playback (A-B REPEAT) This function allows you to play back any section (A-B) in the file repeatedly. After inserting marks A and B while the file is playing you can then repeat the section between the two marks. fig.repeat-a.eps 1. Play back the file. A Press the [A <> B] button once during playback. The [A <> B] button flashes. This point becomes the starting point (A mark) for the playback loop.
VS-100_r_e.book 34 ページ 2009年3月25日 水曜日 午前9時34分 Using the WAVE recorder Using the metronome 1. Press the [METRONOME] button. The metronome function is turned on and the [METRONOME] button flashes. 2. The metronome setting screen is displayed. Use the [CURSOR/VALUE] knob to adjust the tempo, beat, and volume of the metronome. fig.metronome01.eps Parameter Description Tempo Tempo (BPM) Beat Beat Level Volume (0-127) 3. Press the [WAVE RECORDER] button to return to the main screen. 4.
VS-100_r_e.book 35 ページ 2009年3月25日 水曜日 午前9時34分 Using the WAVE recorder Recording while playing back a file You can play back a file in the background and record only your playing at the same time. 1. Select the file to play back in the background (See p. 30). 2. Press and hold the [SHIFT] button, and press the [CURSOR/VALUE] knob. The main screen displays “BG” to the right of the file name. This indicates that the file is selected for background playback. fig.bgMark.eps 3. Press the (Record) button.
VS-100_r_e.book 36 ページ 2009年3月25日 水曜日 午前9時34分 Using the WAVE recorder Deleting a file A deleted file cannot be recovered. 1. From the main screen, press the [CURSOR/VALUE] knob to access the finder screen (p. 26). 2. From the finder screen, turn the [CURSOR/VALUE] knob to select the file that you want to delete, and then press the [CURSOR/VALUE] knob. 3. Turn the [CURSOR/VALUE] knob to highlight “Delete,” and then press the [CURSOR/VALUE] knob. fig.fileDel0.eps 4. A confirmation screen appears.
VS-100_r_e.
VS-100_r_e.book 38 ページ 2009年3月25日 水曜日 午前9時34分 Connections Connecting the AC adaptor Connect the included AC adaptor to the SONAR V-STUDIO 100’s DC IN jack. fig.Connect-ACadpt.eps Power Cord (included) AC Adaptor (included) DC IN to Power Outlet Indicator Place the AC adaptor so the side with the indicator (see illustration) faces upwards and the side with textual information faces downwards. * The indicator will light when you plug the AC adaptor into an AC outlet.
VS-100_r_e.book 39 ページ 2009年3月25日 水曜日 午前9時34分 Connections Connecting computers and audio equipments Before connecting the SONAR V-STUDIO 100 to a computer, read the separate Installation Guide and install the SONAR V-STUDIO 100 driver on the computer. If the driver is not installed, SONAR V-STUDIO 100 cannot be operated correctly from the computer. • Use a USB cable to connect your computer to the SONAR V-STUDIO 100.
VS-100_r_e.book 40 ページ 2009年3月25日 水曜日 午前9時34分 Turning the power on * Once the connections have been completed (p. 38), turn on power to your various devices in the order specified. By turning on devices in the wrong order, you risk causing malfunction and/or damage to speakers and other devices. * This unit is equipped with a protection circuit. A brief interval (a few seconds) after power up is required before the unit will operate normally.
VS-100_r_e.book 41 ページ 2009年3月25日 水曜日 午前9時34分 Connections and signal flow Connecting microphones and guitars fig.Connect-mic-guitar.eps Guitar/Bass Microphone Connect the guitar or bass to INPUT 1 Adjust the input level If you use a phantom power-enable condencer microphone, set this switch to “+48V” Hi-Z Adjust the input level * To prevent malfunction and/or damage to speakers or other devices, always turn down the volume, and turn off the power on all devices before making any connections.
VS-100_r_e.book 42 ページ 2009年3月25日 水曜日 午前9時34分 Connections and signal flow Signal flow when recording with SONAR fig.routing01.eps To USB WAVE IN 1-2 WAVE OUT 1-2 [PLAYBACK] [PAN] [SENS] WAVE IN MAIN 1L MAIN OUTPUT 1/2 INPUT 2R [MAIN MIX] [LEVEL] PHONES output [VOLUME] MIXER If you connect the SONAR V-STUDIO 100 to your computer with a USB cable, you can use SONAR to record sounds input to INPUT 1L/INPUT 2R. * The [PAN] knob does not have any effect on USB audio.
VS-100_r_e.book 43 ページ 2009年3月25日 水曜日 午前9時34分 Connections and signal flow Connecting audio equipment and synthesizers fig.Connect-various.eps Guitar/Bass Microphone Synthesizer, etc. Audio Player, etc. Effects, etc. Monitor amplified speakers Recorder, Mixer, etc. * The sampling frequency of the input signal from digital equipment must be the same as that of the SONAR V-STUDIO 100.
VS-100_r_e.book 44 ページ 2009年3月25日 水曜日 午前9時34分 Connections and signal flow Signal flow when recording with SONAR fig.routing03.eps To USB WAVE IN 1-2 3-4 5-6 7-8 WAVE OUT 1-2 [PLAYBACK] [PAN] [SENS] WAVE IN MAIN 1L MAIN OUTPUT 1/2 2R [MAIN MIX] INPUT [VOLUME] 3L/4R 5L/6R 7/8 MIXER • To control the direct monitor volume for the input signal, use the [MAIN MIX] knob. • To control the SONAR’s playback volume, use the [PLAYBACK] knob.
VS-100_r_e.book 45 ページ 2009年3月25日 水曜日 午前9時34分 Connections and signal flow Signal flow when recording with the WAVE recorder fig.routing04.eps To WAVE RECORDER [PLAYBACK] [PAN] [SENS] 1L MAIN OUTPUT 1/2 2R INPUT [MAIN MIX] PHONES output [LEVEL] [VOLUME] 3L/4R 5L/6R 7/8 MIXER • Signals input to INPUT 1–8 are mixed and recorded on the WAVE recorder. • To control the recording level of the WAVE recorder, use the [MAIN MIX] knob. The recording level can be checked with the level meter.
VS-100_r_e.book 46 ページ 2009年3月25日 水曜日 午前9時34分 Connections and signal flow Connecting footswitches fig.connectFS.eps TIP RING Roland PCS-31 White (TIP) TRS 1/4” phone cable (commercially available) Red (RING) BOSS FS-5U BOSS FS-6 Footswitch 1 Footswitch 2 Polarity switch Footswitch 2 Footswitch 1 Set the switches as shown bellow. B A You can use footswitches to control the actions of the WAVE recorder and SONAR.
VS-100_r_e.
VS-100_r_e.book 48 ページ 2009年3月25日 水曜日 午前9時34分 Using the compressors and equalizers Each analog input on SONAR V-STUDIO 100 is equipped with a compressor and a 3-band equalizer. Turning on the compressors and equalizers fig.compEQ01.eps When you press the [COMP/EQ] button on each channel, that channel’s compressor and equalizer are turned on. • When the compressor and equalizer are on, the [COMP/EQ] button is lit. • The equalizer setting screen is displayed.
VS-100_r_e.book 49 ページ 2009年3月25日 水曜日 午前9時34分 Using the compressors and equalizers Setting the compressors and equalizers fig.compEQ03.eps Equalizer setting screen Compressor setting screen Pressing the compressor/equalizer toggle button switches between the screens for the compressor and the equalizer. Setting the equalizers fig.compEQ04.
VS-100_r_e.book 50 ページ 2009年3月25日 水曜日 午前9時34分 Using the compressors and equalizers Setting the compressors fig.compEQ06.eps 50 Meaning Changing the settings 1 Channel currently displayed Press the [COMP/EQ] button for each channel 2 Compressor bypass Use the [CURSOR/VALUE] knob to set the cursor, and then press the knob 3 Threshold Adjust each of the [THRES], [RATIO] and [GAIN] knobs 4 Compression ratio 5 Output gain 6 Attack time 7 Release time 1.
VS-100_r_e.
VS-100_r_e.book 52 ページ 2009年3月25日 水曜日 午前9時34分 System settings 5. Press the [DISPLAY] button to return to the Formatting an SD memory card An SD memory card that you have just purchased or an SD memory card that has been used by a computer or other device must be formatted as described below before it can be used with the SONAR V-STUDIO 100. When you format an SD memory card, all data on that card will be erased. Be sure to back up any important data before you proceed. previous screen.
VS-100_r_e.book 53 ページ 2009年3月25日 水曜日 午前9時34分 System settings Reverb settings Initialization The digital mixer section provides reverb that can be applied to the signal from each input. When you execute the system setting “Reverb” (p. 55), the reverb screen appears, allowing you to specify the reverb type and adjust the send levels for each input. Initializing the settings To initialize the settings to their factory-set state, proceed as follows. fig.SetRev1.
VS-100_r_e.book 54 ページ 2009年3月25日 水曜日 午前9時34分 System settings Initializing the system settings (Factory Reset) To initialize all settings of SONAR V-STUDIO 100 to their factory-set state, proceed as follows. The data in the SD memory card will not be initialized. 1. Power-off the SONAR V-STUDIO 100. 2. While holding down the [ACT]/[V-LINK] button and the compressor/equalizer setting button, poweron the SONAR V-STUDIO 100. fig.FReset.
VS-100_r_e.book 55 ページ 2009年3月25日 水曜日 午前9時34分 System settings Parameter list Parameter Description Value LCD Contrast Adjusts the contrast of the display. Higher values will make the display appear darker. 0–19 Sample Freq Specifies the sampling frequency of the SONAR V-STUDIO 100. For details, refer to “Sampling frequency setting” (p. 52). 44.1, 48.0, 96.0 (kHz) Reverb Accesses the setting screen for the built-in reverb. For details, refer to “Reverb settings” (p. 53).
3 Hi-Z COAXIAL IN CHANNEL 7&8 L IN RCA R IN CHANNEL 5&6 R IN L IN CHANNEL 3&4 LINE IN MIC IN 1 3 2 SENS AD AD AD AD AD AD FREQ COMP FREQ COMP FREQ COMP FREQ COMP LO MID HI LO MID HI Q LO MID HI Q LO MID HI 8 7 6 5 4 3 2 VS-100 IN 2 1 VS-100 IN 1 To USB switch Pre EQ/Post EQ LEVEL LEVEL LEVEL LEVEL LEVEL PAN PAN SEND LEVEL SEND LEVEL SEND LEVEL SEND LEVEL MAIN L R MAIN MIX REVERB 6 5 4 3 2 1 Reverb switch MAIN MIX VS-100 IN 2 VS-100 IN
VS-100_r_e.book 57 ページ 2009年3月25日 水曜日 午前9時34分 About V-LINK What is V-LINK? V-LINK ( ) is functionality that allows you to perform music and video simultaneously. By connecting V-LINK compatible devices via MIDI, you can easily enjoy a variety of video effects that are linked with your performance. For example, by using the SONAR V-STUDIO 100 in conjunction with the EDIROL Visual Sampler P-10, you can enjoy performing synchronized video from the SONAR V-STUDIO 100.
VS-100_r_e.book 58 ページ 2009年3月25日 水曜日 午前9時34分 Error Message List SD Card Slow/Push Any Key SD Card Locked fig.sd-card-slow.eps fig.sd-card-locked.eps Recording into the WAVE recorder was halted because writing to the SD memory card was not fast enough. The WAVE recorder cannot record because the SD memory card is set to the Lock state (write protect). Press any button to clear this message. Action: Action: • Try formatting the SD memory card (p. 52).
VS-100_r_e.book 59 ページ 2009年3月25日 水曜日 午前9時34分 Error Message List Improper File Coaxial Frequency Mismatch fig.improper-file.eps fig.coax-freq-mis.eps The selected file cannot be played by the SONAR V-STUDIO 100. The selected file cannot be played because it does not match the sampling frequency of the digital signal being input to INPUT 7-8 (COAXIAL IN). Action: • Use SONAR or other software to convert the file to a format that can be played by the SONAR V-STUDIO 100.
VS-100_r_e.book 60 ページ 2009年3月25日 水曜日 午前9時34分 Specifications Digital Audio Workstation: SONAR V-STUDIO 100 Audio Interface, Mixer Number of Input Channels 8 AD/DA Conversion Sample Rate: Signal Processing: 44.1/48.0/96.
VS-100_r_e.book 61 ページ 2009年3月25日 水曜日 午前9時34分 Specifications Control Surface TRACK Control 100mm Touch-sensitive Motorized Fader Assignable Encoder Assign Button Track Select Button: +/Track Control Button: MUTE/SOLO/ARM/SHIFT Track Control Button: LOOP/TRACK VIEW/MARKER Transport ACT Control ACT Button ACT Encoder:R1–R4 WAVE RECORDER * WAVE RECORDER does not function when VS-100 is connected to a computer via USB.
VS-100_r_e.book 62 ページ 2009年3月25日 水曜日 午前9時34分 Index A F L AB button .......................................................... 27 AC adaptor ....................................................... 38 ACT button ................................................ 18, 23 Active Controller Technology ................... 23 Analog Input ............................................. 14, 16 ARM button ...................................................... 21 ASSIGN button ......................................
VS-100_r_e.book 63 ページ 2009年3月25日 水曜日 午前9時34分 Index P S U PAN knob .......................................................... 17 Phantom Power ....................................... 14, 16 Play button ................................................ 22, 27 Playback Loop ........................................................... 33 Playback button ............................................. 30 PLAYBACK knob ............................................. 16 Power switch .............................
VS-100_r_e.book 64 ページ 2009年3月25日 水曜日 午前9時34分 For EU Countries This product complies with the requirements of EMC Directive 2004/108/EC. For the USA FEDERAL COMMUNICATIONS COMMISSION RADIO FREQUENCY INTERFERENCE STATEMENT This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
VS-100_r_e.book 65 ページ 2009年3月25日 水曜日 午前9時34分 For the U.K. IMPORTANT: THE WIRES IN THIS MAINS LEAD ARE COLOURED IN ACCORDANCE WITH THE FOLLOWING CODE. BLUE: NEUTRAL BROWN: LIVE As the colours of the wires in the mains lead of this apparatus may not correspond with the coloured markings identifying the terminals in your plug, proceed as follows: The wire which is coloured BLUE must be connected to the terminal which is marked with the letter N or coloured BLACK.
VS-100_r_e.
VS-100_r_e.book 67 ページ 2009年3月25日 水曜日 午前9時34分 Information Information When you need repair service, call your nearest EDIROL/Roland Service Center or authorized Cakewalk/EDIROL/Roland distributor in your country as shown below. ASIA CHINA U.S.A. Cakewalk, Inc. 268 Summer Street Boston, MA 02210 U.SA (617) 423-9004 http://www.cakewalk.com/ EUROPE EDIROL (Europe) Ltd. Studio 3.4 114 Power Road London W4 5PY U. K. TEL: +44 (0)20 8747 5949 FAX:+44 (0)20 8747 5948 http://www.edirol.
VS-100_r_e.