User manual
Table Of Contents
- Introduction
- Getting Ready to Play
- Playing
- Customizing a kit (KIT EDIT 1)
- Basic Settings (PAD EDIT)
- Effect and Output Destination Settings (OUTPUT/EFFECTS)
- Setting the Kit Volume (KIT VOLUME)
- Renaming a Kit (KIT NAME)
- Linking Multiple Pads (PAD LINK/MUTE)
- Configuring How the Pad Indicators Light Up (PAD LED)
- Making Pads Play in a Predetermined Sequence (PAD SEQUENCE)
- Configuring How the Closed Pedal Sounds (CLOSED-PEDAL)
- Configuring the Overall Kit (KIT EDIT2)
- Importing and Managing Audio Files (WAVE)
- Configuring the Overall Settings for the SPD-SX PRO (SYSTEM)
- Configuring the Pads and the TRIGGER IN Jacks (PAD /TRIGGER IN)
- Configuring the Overall Click Settings for the SPD-SX PRO (SYSTEM CLICK)
- Configuring the Overall MIDI Settings for the SPD-SX PRO (SYSTEM MIDI)
- Configuring the Functions to Assign to the Pads and Footswitch, and Configuring the PAD EDIT Knob and Expression Pedal Settings for the SPD-SX PRO Overall (CONTROL SETUP)
- Viewing the Overall Information for the SPD-SX PRO (SYSTEM INFO)
- Configuring the Input/Output Jack Settings (AUDIO SETUP)
- Configuring the USB Audio Input/Output Settings (USB AUDIO)
- Adjusting the Pad LED Brightness and Colors (SYSTEM LED)
- Configuring the Display, Screen Saver and Auto Off Function (OPTION)
- Initializing the SYSTEM Settings (SYSTEM INIT)
- Copying Kits and Pads (COPY)
- Backing up and Loading the Data (BACKUP)
- Backing up All Settings to a USB Flash Drive (SAVE)
- Loading Backup Data for All of this Unit’s Settings from a USB Flash Drive (LOAD)
- Deleting Backup Data from a USB Flash Drive (DELETE)
- Viewing Information for the USB Flash Drive (INFO)
- Backing up a Kit to a USB Flash Drive (SAVE 1 KIT)
- Loading Kit Backup Data from a USB Flash Drive (LOAD 1 KIT)
- Deleting Kit Backup Data from a USB Flash Drive (DELETE 1 KIT)
- Formatting a USB Flash Drive (FORMAT)
- Shortcuts for Useful Functions (TOOLS)
- Copying a Kit and Swapping Two Kits (TOOLS-COPY KIT)
- Copying a Pad and Swapping Two Pads (TOOLS-COPY PAD)
- Renaming a Drum Kit (TOOLS-KIT NAME)
- Listening/Reverting to the Original Kit Before Edits (TOOLS-UNDO)
- Backing up a Kit to a USB Flash Drive (TOOLS-SAVE 1 KIT)
- Loading Kit Backup Data from a USB Flash Drive (TOOLS-LOAD 1 KIT)
- Importing an Audio File (TOOLS-WAVE IMPORT)
- Saving the Current Settings (TOOLS-WRITE)
- Main Specifications
- Effect List
Configuring the Overall Settings for the SPD-SX PRO (SYSTEM)
105
HI-HAT
Configures the hi-hat settings.
If you’ve assigned the VH series to a TRIGGER IN, the message “Adjust the offset with the offset adjustment screw.” is shown.
Parameter
Value
Explanation
Pedal Mode
HH-
CTRL,
EXP-
CTRL
Switches between functions for the HH CTRL/EXPRESSION jack. HH CTRL and EXPRESSION
cannot be used at the same time.
Hi-
Hat Open/Close Border
0–127
Sets the pedal position used to switch between the open and closed sounds for pads whose
“Layer Type” is set to “HI-HAT”.
CC Max
90, 127
Sets the control change value that’s transmitted when the hi-hat pedal is depressed
completely.
MONITOR
Monitors the velocity.
When you strike a pad, the input strength is shown on the graph.