User manual
Table Of Contents
- Introduction
- Getting Ready to Play
- Playing
- Customizing a kit (KIT EDIT 1)
- Basic Settings (PAD EDIT)
- Effect and Output Destination Settings (OUTPUT/EFFECTS)
- Setting the Kit Volume (KIT VOLUME)
- Renaming a Kit (KIT NAME)
- Linking Multiple Pads (PAD LINK/MUTE)
- Configuring How the Pad Indicators Light Up (PAD LED)
- Making Pads Play in a Predetermined Sequence (PAD SEQUENCE)
- Configuring How the Closed Pedal Sounds (CLOSED-PEDAL)
- Configuring the Overall Kit (KIT EDIT2)
- Importing and Managing Audio Files (WAVE)
- Configuring the Overall Settings for the SPD-SX PRO (SYSTEM)
- Configuring the Pads and the TRIGGER IN Jacks (PAD /TRIGGER IN)
- Configuring the Overall Click Settings for the SPD-SX PRO (SYSTEM CLICK)
- Configuring the Overall MIDI Settings for the SPD-SX PRO (SYSTEM MIDI)
- Configuring the Functions to Assign to the Pads and Footswitch, and Configuring the PAD EDIT Knob and Expression Pedal Settings for the SPD-SX PRO Overall (CONTROL SETUP)
- Viewing the Overall Information for the SPD-SX PRO (SYSTEM INFO)
- Configuring the Input/Output Jack Settings (AUDIO SETUP)
- Configuring the USB Audio Input/Output Settings (USB AUDIO)
- Adjusting the Pad LED Brightness and Colors (SYSTEM LED)
- Configuring the Display, Screen Saver and Auto Off Function (OPTION)
- Initializing the SYSTEM Settings (SYSTEM INIT)
- Copying Kits and Pads (COPY)
- Backing up and Loading the Data (BACKUP)
- Backing up All Settings to a USB Flash Drive (SAVE)
- Loading Backup Data for All of this Unit’s Settings from a USB Flash Drive (LOAD)
- Deleting Backup Data from a USB Flash Drive (DELETE)
- Viewing Information for the USB Flash Drive (INFO)
- Backing up a Kit to a USB Flash Drive (SAVE 1 KIT)
- Loading Kit Backup Data from a USB Flash Drive (LOAD 1 KIT)
- Deleting Kit Backup Data from a USB Flash Drive (DELETE 1 KIT)
- Formatting a USB Flash Drive (FORMAT)
- Shortcuts for Useful Functions (TOOLS)
- Copying a Kit and Swapping Two Kits (TOOLS-COPY KIT)
- Copying a Pad and Swapping Two Pads (TOOLS-COPY PAD)
- Renaming a Drum Kit (TOOLS-KIT NAME)
- Listening/Reverting to the Original Kit Before Edits (TOOLS-UNDO)
- Backing up a Kit to a USB Flash Drive (TOOLS-SAVE 1 KIT)
- Loading Kit Backup Data from a USB Flash Drive (TOOLS-LOAD 1 KIT)
- Importing an Audio File (TOOLS-WAVE IMPORT)
- Saving the Current Settings (TOOLS-WRITE)
- Main Specifications
- Effect List
Effect List
153
Tape Echo
A virtual tape echo that produces a realistic tape delay sound. This simulates the tape echo section of a Roland RE-201 Space Echo.
Parameter
Value
Explanation
Mode
S, M, L, S+M, S+L, M+L,
S+M+L
Combination of playback heads to use
Select from three different heads with different delay times.
S: Short
M: Middle
L: Long
Repeat Rate
0–127
Tape speed
Increasing this value will shorten the spacing of the delayed sounds.
Intensity
0–127
Amount of delay repeats
Bass
-15–+15 [dB]
Boost/cut for the lower range of the echo sound
Treble
-15–+15 [dB]
Boost/cut for the upper range of the echo sound
Head S Pan
L64–63R
Independent panning for the short, middle, and long playback heads
Head M Pan
L64–63R
Head L Pan
L64–63R
Tape
Distortion
0–5
Amount of tape-dependent distortion to be added
This simulates the slight tonal changes that can be detected by signal-analysis
equipment.
Increasing this value will increase the distortion.
W/F Rate
0–127
Speed of wow/flutter (complex variation in pitch caused by tape wear and
rotational irregularity)
W/F Depth
0–127
Depth of wow/flutter
Echo Level (*1)
0–127
Volume of the echo sound
Direct Level
0–127
Volume of the original sound
Level
0–127
Output Level
*1: This parameter corresponds to MFX Ctrl. For details, refer to “Controlling the MFX with the PAD EDIT [1] [2] Knobs (MFX
Ctrl)(P.198)”.
*1: This parameter corresponds to MASTER EFFECT CTRL. For details, refer to “Controlling the MASTER EFFECT with the MASTER
EFFECT Knob (MASTER EFFECT CTRL)(P.199)”.