User manual

Effect List
157
Parameter
Value
Explanation
High Gain
-15–+15 [dB]
Gain of the high range
Balance (*1)
D100:0W–D0:100W
Volume balance between the direct sound (D) and the
delay sound (W)
Level
0–127
Output Level
*1: This parameter corresponds to MFX Ctrl. For details, refer to “Controlling the MFX with the PAD EDIT [1] [2] Knobs (MFX
Ctrl)(P.198)”.
*1: This parameter corresponds to MASTER EFFECT CTRL. For details, refer to “Controlling the MASTER EFFECT with the MASTER
EFFECT Knob (MASTER EFFECT CTRL)(P.199)”.
2Tap Pan Delay
Parameter
Value
Explanation
Tempo Sync
OFF, ON
If this is ON, the delay synchronizes with the tempo.
Delay Time
(msec)
1–2600 [msec]
Adjusts the delay time from the direct sound until the
second delay sound is heard.
Delay Time
(note)
Note
Ø Note(P.197)
Delay
Feedback (*1)
-98–+98 [%]
Adjusts the proportion of the delay sound that is fed back
into the effect. Negative (-) settings will invert the phase.
Delay HF
Damp
200, 250, 315, 400, 500, 630, 800, 1000, 1250,
1600, 2000, 2500, 3150, 4000, 5000, 6300, 8000,
BYPASS [Hz]
Adjusts the frequency above which the delay sound fed back
to the effect is filtered out (BYPASS: no cut).
Delay 1 Pan
L64–63R
Stereo location of Delay 1
Delay 2 Pan
L64–63R
Stereo location of Delay 2
Delay 1 Level
0–127
Volume of delay 1
Delay 2 Level
0–127
Volume of delay 2
Low Gain
-15–+15 [dB]
Gain of the low range
High Gain
-15–+15 [dB]
Gain of the high range
Balance
D100:0W–D0:100W
Adjusts the volume balance between the sound that is sent
through the delay (W) and the sound that is not sent
through the delay (D).
Level
0–127
Output Level
*1: This parameter corresponds to MFX Ctrl. For details, refer to “Controlling the MFX with the PAD EDIT [1] [2] Knobs (MFX
Ctrl)(P.198)”.
*1: This parameter corresponds to MASTER EFFECT CTRL. For details, refer to “Controlling the MASTER EFFECT with the MASTER
EFFECT Knob (MASTER EFFECT CTRL)(P.199)”.