User manual
Table Of Contents
- Introduction
- Getting Ready to Play
- Playing
- Customizing a kit (KIT EDIT 1)
- Basic Settings (PAD EDIT)
- Effect and Output Destination Settings (OUTPUT/EFFECTS)
- Setting the Kit Volume (KIT VOLUME)
- Renaming a Kit (KIT NAME)
- Linking Multiple Pads (PAD LINK/MUTE)
- Configuring How the Pad Indicators Light Up (PAD LED)
- Making Pads Play in a Predetermined Sequence (PAD SEQUENCE)
- Configuring How the Closed Pedal Sounds (CLOSED-PEDAL)
- Configuring the Overall Kit (KIT EDIT2)
- Importing and Managing Audio Files (WAVE)
- Configuring the Overall Settings for the SPD-SX PRO (SYSTEM)
- Configuring the Pads and the TRIGGER IN Jacks (PAD /TRIGGER IN)
- Configuring the Overall Click Settings for the SPD-SX PRO (SYSTEM CLICK)
- Configuring the Overall MIDI Settings for the SPD-SX PRO (SYSTEM MIDI)
- Configuring the Functions to Assign to the Pads and Footswitch, and Configuring the PAD EDIT Knob and Expression Pedal Settings for the SPD-SX PRO Overall (CONTROL SETUP)
- Viewing the Overall Information for the SPD-SX PRO (SYSTEM INFO)
- Configuring the Input/Output Jack Settings (AUDIO SETUP)
- Configuring the USB Audio Input/Output Settings (USB AUDIO)
- Adjusting the Pad LED Brightness and Colors (SYSTEM LED)
- Configuring the Display, Screen Saver and Auto Off Function (OPTION)
- Initializing the SYSTEM Settings (SYSTEM INIT)
- Copying Kits and Pads (COPY)
- Backing up and Loading the Data (BACKUP)
- Backing up All Settings to a USB Flash Drive (SAVE)
- Loading Backup Data for All of this Unit’s Settings from a USB Flash Drive (LOAD)
- Deleting Backup Data from a USB Flash Drive (DELETE)
- Viewing Information for the USB Flash Drive (INFO)
- Backing up a Kit to a USB Flash Drive (SAVE 1 KIT)
- Loading Kit Backup Data from a USB Flash Drive (LOAD 1 KIT)
- Deleting Kit Backup Data from a USB Flash Drive (DELETE 1 KIT)
- Formatting a USB Flash Drive (FORMAT)
- Shortcuts for Useful Functions (TOOLS)
- Copying a Kit and Swapping Two Kits (TOOLS-COPY KIT)
- Copying a Pad and Swapping Two Pads (TOOLS-COPY PAD)
- Renaming a Drum Kit (TOOLS-KIT NAME)
- Listening/Reverting to the Original Kit Before Edits (TOOLS-UNDO)
- Backing up a Kit to a USB Flash Drive (TOOLS-SAVE 1 KIT)
- Loading Kit Backup Data from a USB Flash Drive (TOOLS-LOAD 1 KIT)
- Importing an Audio File (TOOLS-WAVE IMPORT)
- Saving the Current Settings (TOOLS-WRITE)
- Main Specifications
- Effect List
Customizing a kit (KIT EDIT 1)
64
Making Pads Play in a Predetermined Sequence (PAD SEQUENCE)
You can make the waves assigned to each pad play back in the predetermined order you set within a sequence, just by striking a
pad.
For instance, this might be useful when you’ve assigned different waves to each pad for the A section of a song, the B section and
so forth, and then play the pads along with the song as it progresses.
Setting the pad sequence (SET)
1.
Select [MENU] Ó “KIT EDIT1”.
2.
Use the cursor [à] [á] [ã] [â] buttons to select “PAD SEQUENCE” and press the [ENTER] button.
3.
Set the “Step Num”.
4.
Set the “Pad Sequence Pad”.
5.
Press the [F1] (SET) button.
6.
Strike the pads you want to play for each step to assign them.
The pad sequence is automatically set when you’ve finished playing up to the maximum number of steps.
Parameter
Value
Explanation
Step Num
2–16
Select the number of steps for the pad sequence.
Pad Sequence Pad
OFF, PAD1–9, TRIG IN1–8, FOOT SW1–2
Sets the pad used to advance the pad sequence.
Controller
Explanation
Cursor [ã] [â] buttons
Selects the step to set.
[F1] (DONE) button
Confirms the changes and closes the set screen.
[F2] (SKIP) button
Sets the currently selected step as empty. This prevents the unit from playing a sound when a pad is
struck.
[F3] (CANCEL) button
Cancels your changes and closes the set screen.
[F4] (PAD SETTINGS)
button
Configures the Pad Sequence pad parameters that are useful to configure along with the pad
sequence function.
[F5] (PREVIEW) button
Previews the sound for each step.
[F6] (CLEAR) button
Clears all steps.