User`s manual

1-8
Part 1 Introduction
Next, install the driver.
This is required when sending data from a Windows-based program to the SX-15/12/8. Be sure to install it.
Make sure the model you’re using is selected.
Before installing and setting up, click [Read me] for each
piece of software and read the information displayed.
10
For [STIKA Driver], click [Install].
Installation of the driver starts.
11
The driver settings appear.
Check the values, click [Close], and finish installing the
driver.
12
*If the SX-15/12/8 does not operate when you send data from the program, take a look at "4.2 What to do if....".
At the Setup screen, click to close the window.
Remove the CD-ROM from the CD-ROM drive.
13