User`s manual

2-5
Part 2 Performing Cutting
Setting the Cutting Range and Tool Conditions
From the [File] menu, click [Print Setup].
The [Print Setup] dialog box appears.
1
If You're Using Windows 95/98/Me
For the SX-15, select [Roland SX-15]. For the SX-12,
select [Roland SX-12]. For the SX-8, select [Roland SX-
8]. Then click [Properties].
The [Properties] dialog box appears.
* The screen at right is shown when [Roland SX-15] has
been selected.
2
Set the cutting range.
If you are using the included material, make sure the
cutting range is set to the following values.
SX-15 : 340 mm (13.38 in.) (width)
270 mm (10.63 in.) (length)
SX-12 : 250 mm (9.84 in.) (width)
390 mm (15.35 in.) (length)
SX-8 : 160 mm (6.29 in.) (width)
270 mm (10.63 in.) (length)
* If you're using SX-12/8, width is a fixed value.
In [Cutting Area], for [Length], enter a value larger
than the length of the data to cut.
3
Continued on the next page