User`s manual

2-7
Part 2 Performing Cutting
Set the cutting range.
If you are using the included material, make sure the
cutting range is set to the following values.
SX-15 : 340 mm (13.38 in.) (width)
270 mm (10.63 in.) (length)
SX-12 : 250 mm (9.84 in.) (width)
390 mm (15.35 in.) (length)
SX-8 : 160 mm (6.29 in.) (width)
270 mm (10.63 in.) (length)
* If you're using SX-12/8, width is a fixed value.
Click [OK].
The [Properties] dialog box appears.
If you want to change the size, click [Add New Media
Size], and at [Media Size], enter the value for [Length].
In [Cutting Area], for [Length], enter a value larger than
the length of the data to cut.
4
* This is the screen that appears when you click [Add New
Media Size].
Click [OK].
5
If You're Using Windows 2000
From the [File] menu, click [Print Setup].
The [Print Setup] dialog box appears.
1
For the SX-15, select [Roland SX-15]. For the SX-12,
select [Roland SX-12]. For the SX-8, select [Roland SX-
8]. Then click [Properties].
The [Properties] dialog box appears.
2
*To change the settings for the various items, log on to Windows as "Administrator" or as a member of the "Power Users" group.
For more information about groups, refer to the documentation for Windows.
Click [Advanced].
The [Advanced Options] dialog box appears.
3
Continued on the next page