User`s manual

This document is organized as follows.

Part 1 Getting Started

This describes the preparations to make before you use the SX-15/12/8.

Read through this before you use the SX-15/12/8.

Part 2 Performing Cutting

This describes the basic steps for cutting.

Read through this when you're using the SX-15/12/8 for the first time.

Part 3 Mastering the SX

This describes features for further mastering use of the SX-15/12/8.

Part 4 User's Reference

This describes care, maintenance, and troubleshooting for the SX-15/12/8, and also contains the specifications of the SX-15/12/8.

The illustrations appearing in this manual depict the SX-15. The SX-12 and SX-8 may differ from the product shown.

For information about how to use the included Dr. STIKA PLUS program, see the PDF manual for Dr. STIKA PLUS on the Roland

Software Package CD-ROM, or refer to the program's help screens.

How to Read This Document

Windows

is a registered trademark or trademark of Microsoft

Corporation in the United States and/or other countries.

TrueType is a trademark of Apple Computer, inc.

Other company and product names appearing herein are trademarks or registered trademarks of thier respective holders.

http://www.rolanddg.com/