User`s manual

3-4
Part 3 Mastering the SX
3.2 Setting the Tool Conditions
If You're Using Windows 95/98/Me
Start Dr. STIKA PLUS and display the [Properties] dialog
box.
For information on how to display the [Properties] dialog
box, refer to "2.2 Setting the Cutting Range."
1
Click the [Tools] tab.
The [Tools] tab appears.
When using the included blade and material, there is no
need to change the tool conditions. Make sure [Machine
Setting] is displayed and click [OK].
The [Print Setup] dialog box appears.
Click [OK].
2
If You're Using Windows NT 4.0
Start Dr. STIKA PLUS and display the [Properties] dialog
box.
For information on how to display the [Properties] dialog
box, refer to "2.2 Setting the Cutting Range."
1
When using the included blade and material, there is no
need to change the tool conditions. Click [Selected Tool],
and make sure it is set to [Machine Setting].
The [Print Setup] dialog box appears.
Click [OK].
2