User`s manual

3-6
Part 3 Mastering the SX
3.3 Cutting Range
• The sheet behind the cutter holder cannot be cut.
• The front and the left and right side of the material are necessary margins to allow feed of the material by the pinch
rollers.
Blade holder
Maximum
1000 mm
(39-5/16 in.)
Margines
30 mm
(1-3/16 in.)
Pinch rollers
Cutting range (width)
340 mm (13-3/8 in.)
Material
Loadable material (width)
280 to 305 mm (11 to 12 in.)
Blade protector
Blade holder
Maximum
1000 mm
(39-5/16 in.)
Margines
30 mm
(1-3/16 in.)
Pinch rollers
Cutting range (width)
SX-12: 250 mm (9-13/16 in.)
SX-8 : 160 mm (6-1/4 in.)
Material
Loadable material (width)
SX-12: 280 to 305 mm (11 to 12 in.)
SX-8 : 200 to 215 mm (7-13/16 to 8-7/16 in.)
Blade protector
If You're Using the SX-15 If You're Using the SX-12/8
SX-15
SX-12
SX-8
Cutting range (width)
340 mm
(13-3/8 in.)
250 mm
(9-13/16 in.)
250 mm
(9-13/16 in.)
160 mm
(6-1/4 in.)
Cutting range (length)
1000 mm
(39-5/16 in.)
1000 mm
(39-5/16 in.)
1000 mm
(39-5/16 in.)
1000 mm
(39-5/16 in.)
Loadable material (width)
360 to 381 mm
(14-1/8 to 15 in.)
280 to 305 mm
(11 to 12 in.)
280 to 305 mm
(11 to 12 in.)
200 to 215 mm
(7-13/16 to 8-7/16 in.)
Loadable material (length)
1100 mm
(43-1/4 in.)
1100 mm
(43-1/4 in.)
1100 mm
(43-1/4 in.)
1100 mm
(43-1/4 in.)
Cutting range (width)
250 mm (9-13/16 in.)
Loadable material (width)
360 to 381 mm (14-1/8 to 15 in.)
The cutting range is inside the dotted box.