User`s manual

3-9
Part 3 Mastering the SX
Returning the Loadable Material Width to 360 to 381 mm
(14-1/8 to 15 in.)
Raise the sheet adjustment lever on the right side.
1
Detach the pinch-roller stopper from the machine.
2
Move the right pinch roller in the direction of the arrow.
3
Attach the pinch-roller stopper to the left of the pinch
roller.
4
Lower the right sheet adjustment lever.
5
Load material of a width for the SX-15 (280 to 305 mm
(11 to 12 in.)).
6
Change the cutting-width setting for the SX-15 driver
from 250 mm to 340 mm (9.84 to 13.38 in.).
For information about how to change the cutting width,
see "2.2 Setting the Cutting Range and Tool Conditions."
7
Click here and change
the cutting width.
* The screen shown is for Windows 95/98/Me.
The screens for Windows NT 4.0/2000 are different.
Pinch roller
(right)
Pinch roller
(right)
Pinch-roller stopper