User`s manual

3-10
Part 3 Mastering the SX
Raise the sheet adjustment lever.
1
Move the material to the front and back and position it so
that it is straight with respect to the machine.
2
Lower the sheet adjustment lever to secure the material in
place.
3
If material is not loaded parallel with respect to the machine, the material may come loose during cutting.
If you're using the SX-15/12, you can use the sheet adjustment lever to correct the slant of material without removing the material from
the machine.
Front of the machine
Sheet adjustment lever
3.5 Correcting the Slant of Loaded Material