User`s manual

3-13
Part 3 Mastering the SX
Restore the divided object to its original state.
Use the mouse to drag and select all the objects you want
to combine.
At the [Object] menu, click [Combine Polygons].
To select all data in the Dr. STIKA PLUS window, go to
the [Edit] menu and click [Select All].
You can also select only the objects you want by holding
down the SHIFT key and selecting the objects.
4
From the [Edit] menu, click [Delete].
The unneeded data is deleted.
3
Using a Scanner to Import an Object
You can import image data using a scanner.
An image acquired with a scanner can be imported into Dr. STIKA PLUS and outlined for cutting with the SX-15/12/8.
For detailed information, see the PDF manual or help screens for Dr. STIKA PLUS.
Dr. STIKA PLUS supports scanners that comply with TWAIN32. For information on connecting the scanner and installing the scanner
driver, please refer to the scanner's documentation.
Original image data
This is cut as a single object.
Two lines, one on the inner side
and the other on the outer side,
are cut.
A
A
When you are scanning and cutting data such as bold logos, fill the original image before you scan it. Dr. STIKA
PLUS extracts the contours and performs outlining of objects. The portions that the SX-15/12/8 cuts may vary
depending on the original imported image.
2
1