User`s manual

4-2
Part 4 User's Reference
Use a cloth or the like to wipe away any remaining
adhesive on the machine.
3
Place the replacement blade protector on the SX-15/12/8.
Use the reference line shown on the SX-15/12/8 as a
guide for alignment.
4
Peel off the double-sided tape and attach the included
replacement blade protector.
5
If you're using the SX-15, lower the left and right sheet
adjustment levers.
6
Sheet adjustment levers
Replacing the Blade Protector
Slight scratching of the blade protector poses no problem for operation. However, the blade protector should be replaced if it becomes so
severely damaged that cutting is adversely affected.
Consult your vendor or your nearest Roland DG Corp. sales office for replacement of the blade protector. (Replacement of the blade
protector is a charged procedure.)
Switch off the power to the SX-15/12/8.
1
Peel off the blade protector from the machine.
Using a commercially available cutter knife or the like
may make peeling easier.
Remove the blade protector.
If you're using the SX-15, raise the left and right sheet
adjustment levers and remove the blade protector.
2
* Do not place the hands
anywhere along the
path in the direction of
blade movement.
Reference line