User`s manual

4-5
Part 4 User's Reference
A message appears on the computer screen.
Is the message "Write error," "Out of paper," or "Timeout error" displayed on the computer screen?
Communication between the SX-15/12/8 and the computer is not correct. Switch off the power to the SX-15/12/8 and the
computer, then make sure the cable connections are correct. If you are using a cable switching device, remove the switching
device
Is the [Add Printer Wizard] window displayed?
Make sure the SX-15/12/8's driver is installed.
If you connect the SX-15/12/8 to the computer and switch on the power to the SX while the SX driver is not installed on the
computer, then when you start Windows, the message [Add Printer Wizard] appears.
Follow the steps below to install the driver.
1. Click [Cancel].
2. Install the driver for the model you're using from the Roland Software Package CD-ROM.
For information on how to install from the CD-ROM, see "1.4 Installing and Setting Up the Included Software."
Is the blade protector damaged?
If material is cut correctly even though the blade and blade holder are installed correctly, it means that the blade protector is
damaged. Replace with a new blade protector. For information on how to replace it, see "4.1 Replacing the Blade Protector."
Is the blade holder broken or worn?
Replace with a new blade holder.