User`s manual

4-6
Part 4 User's Reference
SX-15 SX-12 SX-8
340 mm (X) x 1000 mm (Y) 250 mm (X) x 1000 mm (Y) 160 mm (X) x 1000 mm (Y)
(13-3/8 in. (X) x 39-5/16 in. (Y) ) (9-13/16 in. (X) x 39-5/16 in. (Y) ) (6-1/4 in. (X) x 39-5/16 in. (Y) )
Width : 360 to 381 mm Width : 280 to 305 mm Width : 200 to 215 mm
(14-1/8 to 15 in.) (11 to 12 in.) (7-13/16 to 8-7/16 in.)
Width : 280 to 305 mm
(11 to 12 in.)
Length : 1100 mm (43-1/4 in.) or less Length : 1100 mm (43-1/4 in.) or less Length : 1100 mm (43-1/4 in.) or less
12 to 100 mm/sec. 12 to 40 mm/sec. 12 to 40 mm/sec.
(7/16 to 3-7/8 in./sec) (7/16 to 1-9/16 in./sec) (7/16 to 1-9/16 in./sec)
PVC sheet (0.1 mm (0.00394 in.) or less in thickness, 0.3 mm (0.0118 in.) or less in thickness including the backing
board).
STANDBY key
STANDBY LED
Parallel (IEEE 1284 compliant: Nibble mode)
Exclusive AC adapter DC+19V 2.1A
510 mm (W) x 165 mm (D) x 430 mm (W) x 165 mm (D) x 330 mm (W) x 165 mm (D) x
105 mm (H) 105 mm (H) 105mm (H)
(20-1/8 in. (W) x 6-1/2 in. (D) x (16-15/16 in. (W) x 6-1/2 in. (D) x (13 in. (W) x 6-1/2 in. (D) x
4-3/16 in. (H) ) 4-3/16 in. (H) ) 4-3/16 in. (H) )
3.1 Kg (6.8 lb) 2.6 Kg (5.7 lb) 2.1 Kg (4.6 lb)
60 dB (A) or less (According to ISO 7779)
5 to 40 °C (41 to 104 °F)
35 to 80 % (no condensation)
AC adapter : 1, Power cord : 1, Ferrite cores : 2, Cable ties (For securing ferrite cores) :2, Blade holder/Blade : 1,
Material for test cuts : 1, Application tape for test cuts : 1, Blade protect : 1, Roland Software Package CD-ROM: 1,
SX-15/12/8 User's Manual : 1
Max. cutting area
Acceptable sheet size*
Cutting speed
Acceptable material
Control keys
LED
Interface
Power consumption
External dimensions
Weight (unit only)
Acoustic noise level
Operation temperature
Operation humidity
Accessories
4.3 Specifications
Main unit Specification
Interface Specification
[ Parallel ]
Standard IEEE 1284 compliant: Nibble mode
Input signal STROBE (1BIT), DATA (8BIT), SLCT IN, AUTO FEED, INT
Output signal BUSY (1BIT), ACK (1BIT), FAULT, SLCT, PERROR
I/O signal level TTL level
Transmission method Asynchronous
*When material having a length of 500 mm (19-5/8 in.) or more is used, then depending on the type of material, it may become misaligned.