Owner`s manual

Troubleshooting

No sound / Low volume:

● Is the SYB-5 properly connected to your

instrument?

Check the connection once more (p. 8).

●

Is the volume turned down on any bass

amp or effects device you have connected?

Check the settings of the connected device.

●

Is OUTPUT B connected?

Sounds are output only from the OUT-

PUT B jack when the effect is switched off

while a plug is connected to the OUTPUT

B jack. When the effect is off, the output

from the OUTPUT A (MONO) jack is

muted, with no sounds being output.

Sound is distorted:

● Is the battery low?

As the battery is drained, the CHECK in-

dicator dims, and the SYB-5 may start to

function incorrectly. Replace with a new

battery (p. 18).

* The battery that was supplied with the unit is for

temporary use, intended primarily for testing its

operation.

* The use of an AC adaptor is recommended as the

unit's power consumption is relatively high. Should

you prefer to use batteries, please use the alkaline

type.

● Could the level of the sound being input

be excessive?

With some bass guitars, distortion may be

produced. Be careful of your bass guitar’s

output level.