Owner`s manual

Panel Descriptions

* If this indicator goes dim or no longer lights while

an effect is ON, the battery is near exhaustion and

should be replaced immediately. For instructions on

changing the battery, refer to “Changing the

Battery” (p. 18).

The CHECK indicator shows whether the effect

is being applied or not. It does not indicate

whether the power to the device is on or not.

3. OUTPUT A (MONO) Jack,

OUTPUT B Jack

The output jacks are used to connect the unit

to amplifiers or other devices.

* For mono output, use OUTPUT A (MONO).

* For stereo use:

Output A:

Only the processed signal is output.

Output B:

Only the dry signal is output.

4. INPUT Jack

This jack accept input signal coming from a

bass.

* When running the unit on battery power, the INPUT

jack as power switch. Power to the unit is turned on

when you plug into the INPUT jack; the power is

turned off when the cable is unplugged. Be sure to

disconnect a cord plugged into the INPUT jack when

not using this effects device. When the AC adaptor is

used, the power remains on at all times, and this

function is disabled.

5. EXP Jack

Connect an expression pedal (the optional

Roland EV-5) here. You can then use the ex-

pression pedal to change the bass synth

sound.

* For more details, refer to “Using the EXP Jack” (p.

15).