Owner`s manual

113

System settings

This initializes the following items, returning them to their

factory-default settings:

• System settings

• Network settings

• Mixer parameters

• Scene memories

• All user libraries

When you initialize the internal memory, all data that had

been saved in memory is lost.

If you want to keep this data, you must save it to USB

memory as a project file (p. 82).

Data for connection to a Wireless LAN router using the LAN

or WIRELESS LAN function cannot be backed up to USB

memory. After completing the operation, connect to the

Wireless LAN router again (p. 101).

Hold down [SETUP] in the DISPLAY section and turn on

the power to the M-200i.

The M-200i starts up in SYSTEM CONFIG MODE, and the

SYSTEM CONFIG screen appears.

Select “FACTORY INITIALIZE“ and press [ENTER].

A message prompting you to confirm the operation is

displayed.

Pressing [ENTER].

Initialization starts.

Pressing [EXIT] will cancel the operation.

Never turn off the power to the M-200i before initialization

finishes.

Turn off the power.

Other settings

Initializing the M-200i’s internal memory

M-200i_e.book 113 ページ２０１３年６月２８日　金曜日　午後１時２７分