Owner`s manual

Explanation of the panels

fig.FaderModSectGuide.eps

This section lets you control the 16 channels you selected in the

LAYER section.

SEL buttons

Use these buttons to select the channel that you want to

control. The [SEL] button of the currently selected channel

lights up.

SOLO buttons

These buttons turn solo on or off for each channel. The

button lights up when solo is on.

“Monitor/Solo” (p. 92)

Meters

These indicate the signal level of each channel.

“Metering” (p. 59)

MUTE buttons

These turn muting on or off for each channel. The button

lights up when a channel is muted.

Faders

These adjust the signal level of each channel.

fig.LayerSectGuide.eps

This section lets you select the channel layer to be assigned to

the fader module section. The button of the currently assigned

channel layer lights up.

USER2 layer button

USER1 layer button

These assign user fader layer 1 or user fader layer 2 to the

fader module section.

“Editing the user fader layers” (p. 94)

AUX/MTX/DCA layer button

This assigns AUX1 through 8, MTX1 through 4, and DCA1

through 4 to the fader module section.

CH 17 - 32 layer button

This assigns CH 17 through 32 to the fader module section.

CH 1 - 16 layer button

This assigns CH 1 through 16 to the fader module section.

Fader module section

LAYER section

M-200i_e.book 18 ページ２０１３年６月２８日　金曜日　午後１時２７分