Owner`s manual

19
Explanation of the panels
Explanation of the panels
fig.MainFaderModGuide.eps
SEL button
This button selects the MAIN channel so that it can be
controlled. It lights up when the MAIN channel is selected.
By repeatedly pressing the [SEL] button, you can alternatingly
select first the MAIN L channel, then the MAIN R channel.
SOLO button
This button turns solo on or off for the MAIN L and R
channels. The button lights up when solo is on.
Mute button
These turn muting on or off for MAIN L and R channels. The
button lights up when MAIN L and R channels are muted.
If “DISABLE MAIN MUTE” in the System Settings (p. 111) is ON,
this button is disabled.
Fader
This adjusts the signal level of the MAIN L and R channels.
Meter
This indicates the signal level of the MAIN L and R channels.
“About the meters” (p. 59)
This display indicates the mixer parameters and system settings,
as well as displaying a list of the meters.
fig.DisplayGuide.eps
In this section, you can access the respective screens for working
with the parameters of the currently selected channel.
EDIT button
This button accesses the CHANNEL EDIT screen.
“Input channel operations” (p. 34), “AUX, MTX, MAIN operations”
(p. 39)
GATE button
This button accesses the GATE/EXPANDER screen.
COMP button
This button accesses the COMPRESSOR/LIMITER screen.
“COMPRESSOR/LIMITER screen” (p. 49)
EQ button
This button accesses the EQ screen.
“4-BAND EQ” (p. 55)
SEND button
This button accesses the SENDS screen.
“SENDS screen” (p. 58)
Main fader module
3
1
2
3
4
5
1
2
3
4
5
Display
CHANNEL EDIT section
4
5
2
3
4
5
1
1
2
This operation is not enabled for the following channels:
• AUX1 - 8
• MTX1 - 4
• MAIN L/R
“GATE/EXPANDER screen” (p. 45)
3
4
5
M-200i_e.book 19 ページ ２０１３年６月２８日 金曜日 午後１時２７分