Owner`s manual
3
USING THE UNIT SAFELY
002c
Do not disassemble or modify by yourself
●
Do not open (or modify in any way) the unit or
its AC adaptor.
.................................................................................................................................
003
Do not repair or replace parts by yourself
●
Do not attempt to repair the unit, or replace
parts within it (except when this manual
provides specific instructions directing you to
do so). Refer all servicing to your retailer, the
nearest Roland Service Center, or an authorized
Roland distributor, as listed on the “Infor-
mation” leaflet.
.................................................................................................................................
004
Do not use or store in the following types of locations
●
Never install the unit in any of the following
locations.
• Subject to temperature extremes (e.g., direct
sunlight in an enclosed vehicle, near a
heating duct, on top of heat-generating
equipment); or are
• Damp (e.g., baths, washrooms, on wet floors);
or are
• Exposed to steam or smoke; or are
• Subject to salt exposure; or are
• Humid; or are
• Exposed to rain; or are
• Dusty or sandy; or are
• Subject to high levels of vibration and shakiness.
.................................................................................................................................
007
●
Make sure you always have the unit placed so it
is level and sure to remain stable. Never place it
on stands that could wobble, or on inclined
surfaces
.................................................................................................................................
008c
Use only the supplied AC adaptor and the correct voltage
●
Be sure to use only the AC adaptor supplied
with the unit. Also, make sure the line voltage at
the installation matches the input voltage
specified on the AC adaptor’s body. Other AC
adaptors may use a different polarity, or be
designed for a different voltage, so their use
could result in damage, malfunction, or electric
shock.
.................................................................................................................................
008e
Use only the included power cord
●
Use only the attached power-supply cord. Also,
the supplied power cord must not be used with
any other device.
.................................................................................................................................
009
Do not bend the power cord or place heavy objects on it
●
Do not excessively twist or bend the power
cord, nor place heavy objects on it. Doing so
can damage the cord, producing severed
elements and short circuits. Damaged cords are
fire and shock hazards!
.................................................................................................................................
010
Avoid extended use at high volume
●
This unit, either alone or in combination with an
amplifier and headphones or speakers, may be
capable of producing sound levels that could
cause permanent hearing loss. Do not operate
for a long period of time at a high volume level, or at a level
that is uncomfortable. If you experience any hearing loss or
ringing in the ears, you should immediately stop using the
unit, and consult an audiologist.
.................................................................................................................................
Used for instructions intended to alert the
user to the risk of injury or material
damage should the unit be used
improperly.
* Material damage refers to damage or
other adverse effects caused with
respect to the home and all its
furnishings, as well to domestic animals
or pets.
Used for instructions intended to alert the
user to the risk of death or severe injury
should the unit be used improperly.
The symbol alerts the user to things that must be
carried out. The specific thing that must be done is
indicated by the design contained within the circle. In the
case of the symbol at left, it means that the power-cord
plug must be unplugged from the outlet.
The symbol alerts the user to important instructions or
warnings.The specific meaning of the symbol is
determined by the design contained within the triangle. In
the case of the symbol at left, it is used for general
cautions, warnings, or alerts to danger.
The symbol alerts the user to items that must never be
carried out (are forbidden). The specific thing that must
not be done is indicated by the design contained within
the circle. In the case of the symbol at left, it means that
the unit must never be disassembled.
About WARNING and CAUTION Notices
About the Symbols
ALWAYS OBSERVE THE FOLLOWING
M-200i_e.book 3 ページ ２０１３年６月２８日 金曜日 午後１時２７分