Owner`s manual

32
Basic operation
Basic operation
You can lock user data to prevent from being accidentally
overwritten.
1.
Access the desired LIBRARY screen.
2.
Verify that the desired channel, effect, or patchbay is
displayed.
3.
At the library data list, select the desired number, then
press [ENTER].
A popup appears.
4.
Move the cursor to LOCK and press [ENTER], then select
locking/unlocking of user data.
1. Access the desired LIBRARY screen.
2.
Verify that the desired channel, effect, or patchbay is
displayed.
3.
At the library data list, select the desired number, then
press [ENTER].
A popup appears.
4.
Move the cursor to the CLEAR and press [ENTER].
A message prompting you to confirm the operation is
displayed.
Clearing data at numbers displayed with “P” (preset data) or
with “L” (locked data) is not possible.
5.
Pressing [ENTER] clears the data from the library and
closes the popup.
Pressing [EXIT] cancels the library data-clear operation.
Locking/unlocking library data Clearing data from a library
M-200i_e.book 32 ページ ２０１３年６月２８日 金曜日 午後１時２７分