Owner`s manual

49
COMPRESSOR/LIMITER screen
COMPRESSOR/LIMITER screen
Compressors are provided on CH1-32, AUX 1-8, MTX1-4 and MAIN L/R.
They apply a user-adjustable ratio of attenuation to input signals that exceed the threshold level.
fig.CompCurve.eps
Limiters are provided on each AUX1-8, MTX1-4, and MAIN L/R.
They attenuate the signal so that the output does not exceed the threshold level.
You can select either compressor or limiter for AUX1 through 8, MTX1 through 4, and MAIN L and R.
By default, the compressor is selected.
The insert point varies according to the type selected.
For more details about insert points, refer to “Block Diagram“ on the final page.
The COMPRESSOR screen is used to perform compressor operations, and the LIMITER screen is used to perform limiter operations.
Compressor/Limiter operations
INPUT LEVEL
OUTPUT LEVEL
THRESHOLD
INPUT SIGNAL
OUTPUT SIGNAL
RATIO
(KNEE=HARD, GAIN=0.0dB, AUTO GAIN=OFF)
INPUT LEVEL
OUTPUT LEVEL
THRESHOLD
INPUT SIGNAL
OUTPUT SIGNAL
(KNEE=HARD)
M-200i_e.book 49 ページ ２０１３年６月２８日 金曜日 午後１時２７分