Owner`s manual

69
Effects, GEQ, External effects
Effects, GEQ, External effects
You use the FX EDIT screen to manipulate effect parameters.
1.
Access the EFFECTS screen.
2.
Move the cursor to the EDIT button for the desired effect
among “FX1-4“ and press [ENTER].
The FX1-4 EDIT screen is displayed.
Use the up and down cursor buttons to move the cursor to
the parameter you want to access, and use the value dial to
adjust the value.
You can also configure USER buttons to access the FX1-4 EDIT
screens (p. 95).
When GEQ is selected as the effect type, refer to “GEQ EDIT
screen” (p. 72).
1. Access the FX EDIT screen.
2.
Press [FUNC] to access the FX EDIT FUNCTION screen.
The operations available at the FX EDIT FUNCTION screen are as
follows:
For information on COPY, PASTE, UNDO, LIBRARY go to “Basic
operation,“ and refer to Copy“ (p. 28), “Paste“ (p. 29), “Undo“(p.
29), “Library“ (p. 30).
Editing effect parameters
Accessing the FX EDIT screen
FX EDIT FUNCTION screen
GEQ ON FADER
When this is set to ON, you can controll a GEQ using
the top-panel faders (p. 73).
(only when the effect type is GEQ.)
0.5dB STEP When this is set to ON, you can operate the GEQ
fader in steps of 0.5 dB.
(only when the effect type is GEQ.)
SOURCE L/R This sets the input source for the specified FX.
DESTINATION L/R This sets the output destination for the specified FX.
BYPASS L/R This turns bypass on/off for the specified FX. When
these are on, the input signal will be “thru-ed” to the
output.
LINK This links the parameters and bypass setting
between the L and R sides.
The following effect types support LR LINK of
parameters:
• DELAY x2
• P.SHIFTER x2
• CH STRIP x2
FLAT
This sets the 31-band GEQ to a flat response.
(only when the effect type is GEQ.)
COPY Copies FX settings to the clipboard.
PASTE When FX settings have been copied to the clipboard,
this pastes the settings from the clipboard.
UNDO This undoes the last-performed parameter paste
operation. It is not displayed when there is no action
to undo.
LIBRARY Accesses the FX LIBRARY screen.
M-200i_e.book 69 ページ ２０１３年６月２８日 金曜日 午後１時２７分