Owner`s manual

7
IMPORTANT NOTES
558a
To avoid disturbing your neighbors, try to keep the unit’s
volume at reasonable levels. You may prefer to use
headphones, so you do not need to be concerned about those
around you.
559a
When you need to transport the unit, package it in the box
(including padding) that it came in, if possible. Otherwise, you
will need to use equivalent packaging materials.
562
Some connection cables contain resistors. Do not use cables
that incorporate resistors for connecting to this unit. The use
of such cables can cause the sound level to be extremely low,
or impossible to hear. For information on cable specifications,
contact the manufacturer of the cable.
Before Using External Memories
Using External Memories
704
Carefully insert the
USB memories
all the way in–until it is firmly
in place.
705
Never touch the terminals of the
USB memories
. Also, avoid
getting the terminals dirty.
708
USB memories
are constructed using precision components;
handle the cards carefully, paying particular note to the
following.
To prevent damage to the cards from static electricity, be
sure to discharge any static electricity from your own body
before handling the cards.
Do not touch or allow metal to come into contact with the
contact portion of the cards.
Do not bend, drop, or subject cards to strong shock or
vibration.
Do not keep cards in direct sunlight, in closed vehicles, or
other such locations.
Do not allow cards to become wet.
Do not disassemble or modify the cards.
About USB memory
930
When the access lamp of USB memory is lit or blinking, please
do not remove the USB memory. This might cause some
damage to the data of the USB memory or deficit.
931
Carefully insert the USB memories, all the way in-until it is
firmly in place.
Before using USB memory for the M-200i, please format the
memory on the M-200i.
For details, please refer to “Formatting USB memory” (p. 85).
Some USB memory might not be able to be used on the M-
200i.If an error message appears when formatting as
described in “Formatting USB memory” (p. 85), it is not
possible to use this USB memory (USB flash Memory and USB
flash drive) for the M-200i.
The M-200i supports only USB memory (USB flash Memory
and USB flash drive).
Hard Disk and Memory Card Reader via USB is not supported.
USB memory (USB flash Memory and USB flash drive) does not
work via USB hub.
We recommend to format USB memory (USB flash Memory
and USB flash drive) before doing mixing operation on the M-
200i.
We recommend to use USB memory (USB flash Memory and
USB flash drive) exclusively for the V-mixer without storing
any other files or programs.
Regarding the CAT5e cable
In order to keep superb digital transfer quality by REAC, please
make sure to use following optional cables for 100m CAT5e
cable:
SC-W100S 100M CAT5e cable
W100S-R 100M CAT5e cable with reel
Channel Edit operation
You might hear some noise when you control the following:
Preamp Gain
4-band EQ
8-band EQ
Gate
Compressor
Limiter
Channel Link
Library Recall
However, this is not out of order.
Multiple connection of REAC
products
When multiple REAC products are connected to REAC on the
M-200i via REAC splitter or switching hub, please set the REAC
mode on each product correctly. If you turn on the power of
these products with REAC mode set incorrectly, there might
be some digital noise generated from REAC products or M-
200i. If this happens, please turn off the power of all REAC
products and set the REAC mode correctly.
Copyright
851852a
It is forbidden by law to make an audio recording, video
recording, copy or revision of a third party’s copyrighted work
(musical work, video work, broadcast, live performance, or
other work), whether in whole or in part, and distribute, sell,
lease, perform, or broadcast it without the permission of the
copyright owner.
Do not use this product for purposes that could infringe on a
copyright held by a third party. We assume no responsibility
whatsoever with regard to any infringements of third-party
copyrights arising through your use of this product.
204
M-200i_e.book 7 ページ 2013年6月28日 金曜日 午後1時27分