Owner`s manual

Effects, GEQ, External effects

You use the effect library to select the effect type. You can recall

effect settings from the library, and store the current effect

settings in the library.

Effect library operations are performed at the FX LIBRARY screen.

Access the EFFECTS screen.

Move the cursor to the LIBRARY button for the desired

effect among “FX1-4“ and press [ENTER].

The FX1-4 LIBRARY screen appears.

Any effect types that currently cannot be used are displayed

with a prohibition symbol.

The M-200i’s effects have following limitations:

• The total amount of RAM access for FX1 through 4 cannot

exceed 100%.

• Regardless of the amount of available RAM access,

“St.REVERB“ cannot be used for more than one FX unit at the

same time.

For the RAM access consumption of each effect algorithm,

refer to “RAM access consumption of each effect algorithm“

(p. 141).

Select the desired number and press [ENTER].

A popup appears.

For more information on library operations, refer to“Library

operations” (p. 30).

Using the effect library

RECALL

This recalls the library data selected using the list.

STORE This stores the library data selected using the list.

LOCK This locks the library data selected using the list.

CLEAR This clears the library data selected using the list.

NAME EDIT This edits the name of the library selected using the

list.

M-200i_e.book 70 ページ２０１３年６月２８日　金曜日　午後１時２７分