Owner`s manual

Effects, GEQ, External effects

Access the desired GEQ EDIT FUNCTION screen.

Move the cursor to the GEQ ON FADER and press [ENTER].

You can accomplish GEQ operations using the faders on the

top panel.

The range of corresponding faders is displayed on the

screen.

Press the layer buttons in the LAYER section (p. 18) to

select the band to manipulate.

The bands that correspond to the layer buttons are as

indicated below.

You can change the range of operation by selecting the GEQ

fader with left and right cursor.

[MUTE] buttons flash for faders whose position is anything other

than 0.0dB. Pressing a flashing [MUTE] resets its fader to the

0.0dB position.

When the “0.5dB STEP“ setting you can make at the GEQ

FUNCTION screen is turned on, you can operate the GEQ faders

in steps of 0.5 dB.

Controlling a GEQ using the top-panel

faders

USER1 layer button

Disabled

USER2 layer button Disabled

AUX/MTX/DCA layer button 630Hz-20kHz

CH17-32 layer button 125-4.0kHz

CH1-16 layer button 20-630Hz

M-200i_e.book 73 ページ２０１３年６月２８日　金曜日　午後１時２７分