Owner`s manual

88
Input/output patchbay
Input/output patchbay
1. Access the PATCHBAY screen.
2.
Select “OUTPUT PATCHBAY“ and press [ENTER].
The OUTPUT PATCHBAY selection screen is displayed.
3.
Select the jack you want to change and press [ENTER].
From the list, select the desired output jack, then press
[ENTER].
If the channel is already patched to the output port, a message
prompting you to confirm the change in output patching is
displayed.Pressing [ENTER] changes the output patching.
Pressing [EXIT] cancels the change in output patching.
If the “PATCHBAY CHANGE“ item in the CONFIRMATION section
of User Preference (p. 94) is not in effect, no confirmation
message is displayed in step 3.
At the INPUT/OUTPUT PATCHBAY LIBRARY screen, you can store
the settings for the current input or output patchbay and recall
the settings later.
1.
Access the PATCHBAY screen.
2.
Select “INPUT PATCHBAY LIBRARY“ or “OUTPUT
PATCHBAY LIBRARY“ and press [ENTER].
The PATCHBAY LIBRARY screen is displayed.
3.
Select the desired number and press [ENTER].
The functions available at the popup are as follows:
For more information on library operations, refer to “Library
operations” (p. 30).
Editing the output patching
Attempting to patch to an ASSIGNABLE OUTPUT jack used
by an EXT FX makes a warning message like the following
appear:
Pressing [ENTER] disables the corresponding EXT FX and
continues with the patching change.
Pressing [EXIT] cancels the patching change.
Using the patchbay libraries
RECALL
This recalls the selected patchbay library.
STORE This stores the selected patchbay library.
LOCK This locks the selected patchbay library.
CLEAR This clears the selected patchbay library.
NAME EDIT NAME EDIT This edits the name of the selected
patchbay library.
M-200i_e.book 88 ページ ２０１３年６月２８日 金曜日 午後１時２７分